In our continuing efforts to provide high quality products, Autodesk has released hotfix DL22158180, which addresses an issue where a 3D Flow analysis could take several days to run, or may fail to complete when running a fiber orientation analysis with a fiber-filled material, with Autodesk® Simulation Moldflow® Insight - Solvers 2014 FCS, Service Pack 1, and Service Pack 2.
This document contains the latest information regarding the installation and use of this update. It is strongly recommended that you read this entire document before you apply the update to your product. For reference, you should save this document to your hard drive or print a copy.
Contents
When running a 3D Flow analysis with a fiber-filled material, and the option to run a fiber orientation analysis selected, for some models the analysis may appear to stall. The problem manifests in the analysis running at normal speed up to a particular timestep and then taking several days to complete the next timestep, or failing completely. This problem does not arise unless the option to run a fiber orientation analysis is selected.
This hotfix fixes the problem so that all fiber orientation analyses can be completed within the standard analysis time.
This hotfix should only be applied to systems directly affected by the issue described above, as this was the only issue this hotfix was created to address.
For application of this hotfix, your system must have the following product installed:
This hotfix is available in 32-bit and 64-bit versions for Windows and also in four (4) Linux versions. Once installed, it will appear as an update under Add/Remove Programs on Windows systems, and can be uninstalled from there.
Windows Versions
Linux Versions
We thank all our customers who identified this issue and reported it to us. These reports give us the opportunity to improve the product and provide you with the best solution in mechanical design. We also thank you for your continued business and for feedback regarding the content of this update release.
Respectfully,
Autodesk Simulation Moldflow Insight Product Team
Copyright © 2013 Autodesk, Inc.