Thank you for downloading Autodesk^® AutoCAD^® Civil 3D^® 2014 Service Pack 1.

This readme contains the latest information regarding the installation and use of this service pack. It is strongly recommended that you read this entire document before you apply this service pack to your product. Autodesk^® AutoCAD^® Civil 3D^® 2014 Service Pack 1 contains the fixes included in Autodesk^® AutoCAD^® 2014 Service Pack 1 and Autodesk^® AutoCAD^® Map 3D 2014 Service Pack 1. This service pack includes all previous hotfixes and service packs for AutoCAD Civil 3D 2014 including Hotfix 1. Because Autodesk AutoCAD Civil 3D is built on Autodesk AutoCAD and Autodesk AutoCAD Map 3D, it is recommended that you also review the AutoCAD and AutoCAD Map 3D readme files at the following locations. For reference, you should save these documents to your hard drive or print a copy.

Autodesk AutoCAD® 2014 Service Pack 1 Readme

Autodesk®AutoCAD®Map 3D 2014 Service Pack 1 Readme

When you are installing this service pack, a prompt with options to "Automatically close applications and attempt to restart them after setup is complete" or "Ignore" may be displayed. It is required that you close Autodesk^® AutoCAD^® Civil 3D^® 2014 before proceeding with the installation of Autodesk^® AutoCAD^® Civil 3D^® 2014 Service Pack 1. It is also recommended that you reboot your system after installing the service pack.

WARNING: Before uninstalling the service pack please read the Uninstall This Service Pack section.

Contents

• Who Should Install This Service Pack?
• Primary Issues Resolved by This Service Pack
• General Installation Information
• Installation Instructions
  • Apply This Service Pack to a Stand-Alone Installation
  • Apply This Service Pack Through a Local Network
  • Apply This Service Pack to a Network Administrative Image
  • Uninstall This Service Pack

You can apply this service pack to the following Autodesk products running on all supported operating systems and languages. Be sure to install the correct service pack for your software.

You can also use Communication Center to install the Live Update Maintenance Patches, which will automatically show the correct Hotfix or Service Pack for your product.

64-bit Product	Service Pack
Autodesk AutoCAD Civil 3D 2014	C3D2014_x64_SP1.0.exe

Return to Top

The following issues have been resolved in Autodesk AutoCAD Civil 3D 2014 Service Pack 1:

Alignments

• Using the Create Best Fit Alignment command no longer causes the application to close unexpectedly.

Corridor Design

• Importing a subassembly that exists in a folder with a long path no longer causes the application to close unexpectedly.
• Setting an override from True to False for a parameter in the Corridor Section Parameter Editor when the Corridor Section Editor viewports are configured to display multiple viewports no longer causes the application to close unexpectedly.
• Surface profiles that are generated from a data-referenced corridor surface and a data-referenced alignment (using the data shortcuts feature) are now dynamic.
• The application no longer closes unexpectedly when you are working in a drawing with the Corridor Section Editor open and you then open (or create) and then close another drawing.
• Importing a subassembly when a Tool Palette is not displayed no longer causes the application to close unexpectedly. To import a subassembly to a Tool Palette, the Tool Palette must first be open. If no Tool Palette is open, the option to import the subassembly to a Tool Palette is not available for selection.
• Attaching another subassembly to a LinktoMarkpoint subassembly that exists in an offset assembly no longer causes the application to close unexpectedly.
• 3D polylines that exist in the drawing no longer appear by default in the Corridor Section Editor.
• Importing a subassembly to a Tool Palette and then re-importing the same subassembly no longer causes the application to close unexpectedly.
• When you create a subassembly from a polyline, the behavior of the Link Creation setting now works as expected.
• Corridor feature lines that are drawn at fixed offset distances now appear as expected in the drawing.

Section Views

• The positions of volume tables are now maintained when a drawing containing them is saved, closed, and reopened.

General/Other

• Stability when using a menu with a drop down list has been improved.
  
• Using Ctrl+Tab to switch between open drawings while the Layer Manager is open no longer causes the application to display an error message and close unexpectedly.
• Opening a drawing that was created in AutoCAD Civil 3D 2013 (or in an earlier version) that contains data references no longer causes the application to close unexpectedly.
  
• Selecting points within the Point Editor and then clicking in the Style column no longer causes the application to close unexpectedly.
  
• Importing profile view band styles now works as expected.
  
• Creating feature lines from a large number of polylines no longer causes the application to close unexpectedly.
  
• Grip editing a feature line after using the feature line Fillet command and then using the UNDO command no longer causes the application to close unexpectedly.
  
• Using the ExportToAutoCAD command on a drawing that has an attached xref no longer causes the application to close unexpectedly.
  
• Using the APPLOAD command to load AeccCustomDraw.dbx, AeccCustomEvent.dbx and AeccCustomUI.dbx now works as expected.
• The geographic location is now correct when the units in the drawing are different from the units in the Geographic Location dialog box.
• To use the ImportCAiCEKCM command, the Microsoft® Access Database Engine 2010 Redistributable must be installed first. You can download the Microsoft Access Database Engine 2010 Redistributable from http://www.microsoft.com/en-us/download/details.aspx?id=13255.
  
• Starting the application after uninstalling AutoCAD® Map 3D 2010 no longer causes the application to close unexpectedly.

Labels

• Values are now rounded correctly in profile station labels that use station index format with rounding.

Autodesk AutoCAD Map 3D Integration

• Live Map Data tiles are now loaded correctly when opening the application.
• The MAPIMPORT command now imports SHP and SDF files as expected.

Object Enabler

• Using the eTransmit command in Autodesk® AutoCAD® or Autodesk® AutoCAD LT® when the Civil Object Enabler is installed no longer causes the program to close unexpectedly.
  
• Drawings that contain alignments, profiles, and pressure networks that are created in the current version of the program and then saved in an earlier version of the program now open as expected in AutoCAD (or other object-enabled program) when the Civil Object Enabler is installed.

Parcels

• Running the Parcel Map Check report no longer causes the application to close unexpectedly.
• Using the Delete PI command on a parcel segment point of intersection no longer causes the application to close unexpectedly.
• Editing a parcel segment by holding the Ctrl key down and moving a grip no longer causes the application to close unexpectedly.

Pipes

• Deleting a pipe or structure when the Toolspace window is hidden no longer causes the application to close unexpectedly.
• On the Microsoft^® Windows 8^® operating system, if you display a rollover tooltip for a pipe network and then exit the application, the application no longer closes unexpectedly.
• Changing a pipe network part in the source file of a data shortcut now updates the part style in the referenced pipe network as expected.
• Inserting a custom part into a pipe network now works as expected.
  
• Using the Batch Import command to import pipe network parts into the Content Catalog Editor now works as expected.
  
• The accuracy of the Part Builder Data Structure Table has been improved.
  
• The structure style block rotation is now aligned with the 3D solid.

Pressure Networks

• When using the Follow Surface command, the application no longer closes unexpectedly if the reference surface for the pressure network has a gap in it.

Profiles

• Using the Profile Layout Tools toolbar no longer causes the application to close unexpectedly.

Profile Views

• Pressure network parts can now be re-drawn in profile view after drawing them in profile view and deleting them.

Points

• Adding points to a table, using the UNDO command, and then selecting the table no longer causes the application to become unresponsive.
• The Convert Land Desktop Points command now uses the Preserve Original Point Layer setting.

Point Clouds

• The Window selection option in the Add Points to Surface command now works as expected.
• Creating a point cloud or a surface from an ESRI ASC file now works as expected.
  
• Attaching an RCP or RCS point cloud to the drawing and then adding AutoCAD Civil 3D properties to the point cloud now works as expected.

Project Manager

• Extra .map files are no longer created when importing a Vault project.

Quantity Takeoff

• Adding, removing, and then re-adding a point file to a surface definition no longer causes the application to close unexpectedly.
  

Subassembly Composer

• Void areas in corridor subassemblies are now displayed as expected in cross section views.

Surfaces

• Surface analysis colors defined from color books are no longer converted to index colors for rendering in model space.
• Surface analysis data is now maintained after the surface is rebuilt.
• Surface analysis values that are outside of the defined ranges no longer appear as white in the drawing.
• Switching to a different layout when the Level of Detail mode is active no longer causes the application to close unexpectedly.
• If a DEM file that is added as surface data does not contain coordinate system information, the coordinate system that you assign when adding the DEM file is now used for the surface.
• DEM files inserted as raster images are now positioned correctly.
• Polylines created with the Water Drop command now use the PLINEGEN system variable.
• Using the Paste Surface command no longer causes the application to close unexpectedly.

Survey

• Exploding a large number of survey figures, and then copying and pasting the entities into another drawing, no longer causes the application to close unexpectedly.
• The Logging Enabled setting (under Change Reporting) is now included when the survey database settings are saved to an external file.
• Importing a LandXML file with an invalid data format no longer causes the application to close unexpectedly.
• Creating a new survey database after importing survey database settings from a file no longer causes the application to close unexpectedly.
• Traverses are now inserted into the drawing with the expected rotation angle.
• Importing a field book file when the drawing coordinate system and survey database coordinate system are different no longer causes the application to close unexpectedly.
• Importing a field book without having a network selected first will no longer cause the application to close unexpectedly.
• Coordinate values are now created correctly when importing a Face 1 and Face 2 reciprocal observation field book file.

Return to Top

As you prepare to install this service pack, keep the following in mind:

Back Up Custom Files

It is recommended that you back up all custom CUIX, MNR, and MNL files before you apply this service pack.

Administrative Privileges

During installation or uninstallation, you may be prompted for the original installation media or a network image. In order to apply this service pack, you must have privileges to install and uninstall products.

Network Deployment

Administrators can deploy this service pack over a network using the Deployment Wizard.

About Your Product

After you install, product information displays in the About dialog box.

Reboot

After you install, it is recommended to reboot your system even if not prompted.

Return to Top

• Apply This Service Pack to a Stand-Alone Installation
• Apply This Service Pack Through a Local Network
• Apply This Service Pack to a Network Administrative Image
• Uninstall This Service Pack

Follow these instructions to install this service pack on a single computer.

1. Download the service pack and save it to any folder.
2. Close all running Autodesk applications.
3. Insert the product media (for example, the Autodesk AutoCAD Civil 3D installation disc) or make sure the installation source files are available.
4. Find the folder where you saved the service pack and double-click the executable (EXE) file.

Return to Top

You can use InfoCenter to apply this service pack through your local network. Detailed instructions on how to set up patching through your local network are listed in the InfoCenter Tab topic in the CAD Manager Control Utility Help.

Note: You can install the CAD Manager Control Utility from the product installation media. Select Install Tools and Utilities and then select Autodesk CAD Manager Tools.

Return to Top

The following method of distributing Autodesk AutoCAD Civil 3D 2014 Service Pack 1 applies only to administrative images created with the Autodesk AutoCAD Civil 3D 2014 Network Installation wizard. After you complete this procedure, any new deployments of Autodesk AutoCAD Civil 3D 2014 will have the update applied to them automatically. For complete information on updating a Network Administrative Image please see the AutoCAD Civil 3D 2014 Network Administrator's Guide.

To apply Autodesk AutoCAD Civil 3D 2014 Service Pack 1 to an existing Autodesk AutoCAD Civil 3D 2014 administrative image:

1. On the workstation where you initially created the Autodesk AutoCAD Civil 3D 2014 deployment, open the Tools folder and double-click the Create and Modify a Deployment shortcut icon.
2. On the Create Deployment > Configure page under Modification Options, select Create a New Deployment Using an Existing Deployment as a Template.
3. Specify a new name for the deployment, review and make any other changes, then click Next.
4. On the Create Deployment > License Agreement page, review the agreement and click Next.
5. On the Create Deployment > Product Information page, review the license information and click Next.
6. On the Create Deployment > <Deployment Name> page, click on Autodesk AutoCAD Civil 3D 2014 in the product list to open the Configure options.
7. Under Service Packs, select Include Service Pack 1 from Autodesk.com and click Download.
8. Select the option to append the service pack(s) to the deployment.
9. Review and make any other changes and then click Create. Now any new deployments of Autodesk AutoCAD Civil 3D 2014 will have the service pack applied to them automatically.

Return to Top

It is required to have the original installation source files for the uninstall to be successful. It is not possible to uninstall the service pack if the installation source is a network administrative image with service pack 1 merged.

Follow these instructions to uninstall this service pack on a single computer.

1. Insert the product media (for example, the Autodesk AutoCAD Civil 3D installation disc) or make sure the installation source files are available.
2. In Windows Control Panel > Uninstall a Program, select View Installed Updates.
3. Under the Autodesk AutoCAD Civil 3D 2014 heading, right-click on Autodesk AutoCAD Civil 3D 2014 SP1 and choose Uninstall.

Note: Uninstalling the service pack in a side by side environment where AutoCAD Map 3D 2014 and AutoCAD Civil 3D 2014 are installed on the same machine may cause licensing errors for the applications on start up.

The problem is caused by the adlmint.dll and the adlm_libFNP.dll files in the installation root folder being out of sync.

Should this occur, follow these instructions to resolve the issue:

1. Navigate to the following location on your product media: <DVD Drive>:\x64\C3D\Program Files\Root\Retargetable Folder #2.
2. Copy adlmint.dll and adlm_libFNP.dll.
3. Paste adlmint.dll and adlm_libFNP.dll into the installation root folder (for example, C:\Program Files\Autodesk\Autodesk AutoCAD Civil 3D 2014).

Return to Top

Copyright ©2013 Autodesk, Inc.