Thank you for downloading Autodesk AutoCAD^® Electrical 2014 Service Pack 1.1.

This readme contains the latest information regarding the installation and use of the Service Pack. It is strongly recommended that you read the entire document before you apply the Service Pack to your product. For reference, you should save this document to your hard drive or print a copy.

Contents

• Who Should Install This Service Pack?
• Primary Issues Resolved by This Service Pack
• Problems Reported with the Customer Error Reporting Utility
• General Service Pack Updates
• General Installation Information
• Before You Begin
• About Windows Command Line Switches
• Installation Instructions
  • Apply This Service Pack to a Stand-Alone Installation
  • Apply This Service Pack Through a Local Network
  • Apply This Service Pack to a Network Administrative Image
  • Uninstall This Service Pack

You can apply this Service Pack to the following Autodesk products running on all supported operating systems and languages. Be sure to install the correct Service Pack for your software.

32-bit Product	Service Pack
Autodesk AutoCAD Electrical 2014	ACE2014SP1.1_32bit.exe

64-bit Product	Service Pack
Autodesk AutoCAD Electrical 2014	ACE2014SP1.1_64bit.exe

This Service Pack can be applied to AutoCAD Electrical 2014 installed as a standalone application as well as AutoCAD Electrical 2014 installed from Autodesk Product Design Suite 2014.

Return to Top

• Problems Reported with the Customer Error Reporting Utility
• General Service Pack Updates

As a result of detailed information from customers who used the Customer Error Reporting Utility, a number of problems were identified and fixed. This service pack also includes problems fixed by Autodesk AutoCAD 2014 Service Pack 1. Updates have been made in the following commands and features:

Project Manager

• Occasional crashes while working with Project Manager.

OLE

• Occasional crashes or program hangs when performing copy and paste or plot operations with drawings that contain OLE objects.

Return to Top

This service pack also includes Autodesk AutoCAD 2014 Service Pack 1. The following defects have been addressed by AutoCAD Electrical 2014 Service Pack 1.1:

Cross Reference

• Symbol mapping option of the table style cross referencing does not work unless the library is listed first in the Project Properties.

Catalog Lookup

• Catalog data shifts some of the columns when do the Catalog Lookup for some special database.
• Catalog lookup locks up when switch from a table have more columns to a table have less columns.

Insert/Edit Components/Footprints

• Insert Panel from Schematic list may fail in some Localization version.
• DESC1, DESC2 and DESC3 are not copied to multi-pole when insert child poles.

Ladder

• Set Line reference values with sheet number template does not update to match the drawing sheet number during creation of new drawing.

Project Tools

• Project_wide update always save drawings in 2013 format.
• Component Update From Catalog does not work well to update the Weblink and Pinlist.

Tagging

• Fails to recognize duplication of tag when working with multiple drawings.

Terminal Strip Editor

• Cannot sort by all column headers in Terminal Strip Editor.

Return to Top

• Before You Begin
• About Windows Command Line Switches

Note: Autodesk 360 (AdSync) patch will automatically be installed with the AutoCAD Electrical Service Pack.

Return to Top

As you prepare to install this Service Pack, keep the following in mind:

Back Up Custom Files

It is recommended that you back up all custom CUIX, MNR, and MNL files before you apply this Service Pack.

Administrative Privileges

During installation, you will be prompted for the original installation media or a network image. To apply this Service Pack, you must have administrative privileges to install and uninstall products.

Network Deployment

Administrators can deploy this Service Pack over a network using the Deployment Wizard.

About Your Product

After you install the Service Pack, updated product information displays in the About dialog box.

Reboot

After you install this Service Pack, it is recommended to reboot your system even if not prompted.

Return to Top

The following Microsoft Windows command line switches are built into this Service Pack:

• /e – Extracts the MSP file from the Service Pack executable file.
• /q – Suppresses the completion message after the Service Pack is applied. This is useful if you use a script or batch file to apply this Service Pack to multiple computers.

Instructions about how to use the /e command line switch are included in the installation procedures that follow.

Return to Top

• Apply This Service Pack to a Stand-Alone Installation
• Apply This Service Pack Through a Local Network
• Apply This Service Pack to a Network Administrative Image
• Uninstall This Service Pack

Follow these instructions to install this Service Pack on a single computer.

1. Download this Service Pack and save it to any folder.
2. If required, insert the product media (for example, the AutoCAD Electrical installation disc).
3. Find the folder where you saved the Service Pack and double-click the executable (EXE) file.

Return to Top

Follow these instructions to install this Service Pack on multiple computers using your local network.

1. Download this Service Pack and save it to any shared folder on your local network.
2. Find the shared folder where you saved the Service Pack, and double-click the executable (EXE) file.

Note: Installation through your local network using the CAD Manager Control Utility is not supported for this Service Pack.

Return to Top

The following distribution method applies only to administrative images created with the Deployment wizard. After you complete these procedures, subsequent deployments of your product will include this Service Pack.

In all cases, append this Service Pack to the deployment. The only time it is appropriate to merge the Service Pack is if you intend to distribute the deployment through a group policy object.

The patch (Service Pack) file that you download contains an MSP (Microsoft Patch) file, which you extract from the executable file using the /e (extract) switch.

1. From the Autodesk Product Support website, download the Service Pack EXE file to your local computer.
2. On the Start menu (Windows), click Run. Enter the following information and click OK.

   <local_drive:>\<patch_name> /e <local_drive:>\< patch_name>.msp

3. Insert the Autodesk media and launch setup.exe.
4. Select Create Deployments. Click Next.
5. On the Begin Deployment page, in the Specify the Deployment Location box, enter the shared network location where you would like to create an administrative image, or click Browse to find a location. Users will install the product from this location.
6. In the Specify a Deployment Name box, enter the name for your deployment.
7. Continue through the Deployment wizard, open and configure the deployment in the product configuration page, click Add to find the Service Pack extracted in Step 2. Notice that the Service Pack has been added in the Include Service Pack(s) from Local Drive or Local Network box. Close and return to the product list.
8. Follow the instructions in the Deployment wizard to complete the Service Pack deployment.

Note: When the AutoCAD Electrical Service Pack is included in a deployment, the deployment will install the Service Pack without the update files for Autodesk 360.

Note: The extraction of MSP from the service pack executable requires VC++ runtime redistributable 2010. Please make sure it is installed before extracting the MSP file.

Return to Top

Windows XP

1. From the Start menu (Windows), click Settings > Control Panel.
2. In Control Panel, click Add or Remove Programs.
3. In the Add or Remove Programs window, select the Show Updates option.
4. Find the appropriate Service Pack in the list of programs. Click Remove.

Windows 7 / Windows 8

1. Start Control Panel.
2. Click Programs.
3. Click Programs and Features.
4. In the Programs and Features window, in the left pane, click View Installed Updates.
5. Find the appropriate Service Pack in the list of updates. Click Uninstall.

Return to Top

We want to express our appreciation to all our customers who identified these issues and reported them to us. Their reports gave us the opportunity to improve the product for everyone's benefit. We also thank you for your continued business, and for your feedback regarding this release.

Respectfully,

The Autodesk AutoCAD Electrical Product Team

Return to Top

Copyright ©2013 Autodesk, Inc.