Readme for the Autodesk Civil 3D 2005 Hot Fix 1

Autodesk Civil 3D 2005 Hot Fix 1

In a continuing effort to provide high quality products, Autodesk has released the Autodesk Civil 3D 2005 Hot Fix 1.

This Readme contains information regarding the installation and use of this Hot Fix. It is strongly recommended that you read this entire document before you apply the Hot Fix to your product. For your reference, you should save this Readme to your hard drive or print a copy.

This Readme includes the following topics:

 

Who Should Install Hot Fix 1?

This Hot Fix is for the locked and unlocked versions of Autodesk Civil 3D 2005 running on English-language and non-English-language operating systems.

Important: You cannot run an automatic uninstall to remove this Hot Fix. It is recommended that you make a back up of the affected file as described in the installation instructions so it can be restored if necessary.

Summary of Hot Fix 1

This Hot Fix does the following:

Installing Hot Fix 1

The Hot Fix requires replacing one file, AeccLand20.dbx.

Prerequisites

You must have the Autodesk Civil 3D 2005 Service Pack 1 installed prior to installing this Hot Fix. To verify you have the Service Pack 1 installed, do the following:

  1. Locate the file named AeccLand20.dbx in C:\Program Files\Common Files\Autodesk Shared\.
  2. Right-click AeccLand20.dbx and select Properties.
  3. Click the Version tab.
    The SP1 file has a file version of 200.0.282.0.
Installing the Hot Fix
  1. Create a back up of your current AeccLand20.dbx file so it can be restored if necessary. This file is located in C:\Program Files\Common Files\Autodesk Shared\.
  2. Download the Hot Fix and save it to any folder.
  3. Unzip the Hot Fix to C:\Program Files\Common Files\Autodesk Shared\.
    The file version of the new AeccLand20.dbx file is 200.0.289.0.

Copyright 2005 Autodesk, Inc.