Autodesk®
DL20621753 - Vault 2011 - Search Hotfix

In a continuing effort to provide high quality products, Autodesk has released this hotfix which provides the following updates;

  • Resolution of a search issue.
  • Cumulative updates.
  • This README file highlights how to install this hotfix and other important information regarding this update.

    CONTENTS

    Description of the Issues
    System Requirements
    Related Hotfixes and Utilities
    Known Issues
    Warnings
    Files Affected
    Update Verification
    Installation Instructions
    Legal Notice

    Description of the Issues

    New Updates

    1. Some numeric values were treated as wild cards when performing an advanced search in Vault Explorer returning unexpected search results.


    Cumulative Updates

    1. Adding a lifecycle definition in a connected workgroup environment was causing unnecessary file reindexing.
    2. The tip consumable document revision was not being updated when performing workflows that affect historical document revisions.
    3. When performing a 'remove' Groups or Users operation in Configure Lifecycle Security a permission denied error is thrown (Error 303).
    4. When multiple security settings are enabled on a folder, the settings would incorrectly prevent a user from performing a state change on a file.
    5. A property mapping performance enhancement prevents an error 109 from occurring when editing existing User Defined Properties.
    6. After installing update TS15770173_Server, an item state change was denied or resulted in an error 303.
    7. When performing a search on entities that contain Greek characters, the characters were acting like wild card characters.
    8. A migration issue has been resolved for error messages containing the following;
      1. Cannot insert duplicate key in object 'dbo.ContentSourcePropertyDef'
    9. Property fields containing certain characters would cause the More button to become unresponsive on file, item or search grids.
    10. For folders and files with security restrictions, it was possible to perform some operations (ex. state change).
    11. Some Vault configurations would result in an error when attempting to export the configuration.
    12. Title blocks containing a comma character in the attribute would result in an error when trying to map the property.
    13. Attempting to import large revision schemes would time out before the operation could be completed.
    14. When selecting a custom Category an error 3507 would occur with the message 'Invalid Behavior 'Flexible Release Process'.
    15. Performing a search would sometimes result in an error 227.
    16. When performing an index block attribute, properties were not being extracted correctly.
    17. When performing a B2B migration in a replicated environment, a subscriber site may not properly lock down preventing the migration.

    System Requirements


    Vault Server

  • Autodesk Data Management Server 2011 Update 2
  • Autodesk Data Management Server 2011 Update 2 (Workgroup)
  • Autodesk Data Management Server 2011 Update 2 (Collaboration)
  • Autodesk Data Management Server 2011 Update 2 (Professional)


  • Vault Client

  • Autodesk Vault Workgroup 2011 Update 2
  • Autodesk Vault Collaboration 2011 Update 2
  • Autodesk Vault Professional 2011 Update 2

  • Related Hotfixes and Utilities


    This cumulative update contains some of the updates from the following hotfixes (see Cumulative Updates);

  • DL20485035
  • DL18678826
  • ts18105851
  • ts17091635
  • ts16973407
  • ts16930267
  • ts16521805
  • ts16102141
  • ts16092983
  • ts16010228
  • ts15770173
  • Autodesk Inventor 2011 SP1 DL16094377 or Autodesk Inventor 2011 SP2 is required to resolve all issues.

    This update should be used in conjunction with ts15770173_Client (included).

    This update should be used in conjunction with ts17520377 (or later) to solve all item import/export issues.

    The installation of DL20322676 is recommended.


    Known Issues



    Warnings


    It is strongly recommended to perform a back up prior to the application of this update.

    This hotfix cannot be uninstalled. To revert to a pre hotfix state, the application must be reinstalled and a pre hotfix back up must be restored.


    Files Affected


    DL20621753

  • Connectivity.Platform.dll


  • ts15770173_client

  • Connectivity.Explorer.DocumentPS.dll

  • Update Verification

  • The updated Connectivity.Platform.dll file is version 15.2.66.570.
  • Installation Instructions


    WARNING: Failure to follow these instructions properly may result in unusable sites.

    NOTE: Always ensure that a successful backup has been performed before applying any hotfixes.


    SINGLE SITE

    Hotfix Installation

    1. Reset the web service on the Autodesk Data Management Server (ADMS) by typing 'iisreset' at a command prompt.
    2. Run DL20621753.msp on the server to install the hotfix.
    3. Open the ADMS Console and migrate all unmigrated databases and libraries before proceeding.
      1. NOTE: It may be necessary to detach an unmigrated database if the update addresses a migration problem.
    4. Close the ADMS Console application.

    Database Update

    1. Open a command prompt and navigate to the installed location of Connectivity.ADMSConsole.exe.
    2. Run ADMS b2bmigrate operation in command line mode:
      1. Example: Connectivity.ADMSConsole.Exe -Ob2bmigrate -VUadministrator -VPadmin_password -DBUsql_user -DBPsql_password
      2. NOTE: Replace 'admin_password' with the appropriate administrator password for the -VP switch.
      3. The last two command line parameters are required only if the 'sa' password is not the default password.
    3. A 'migration successful' dialog will display when the b2bmigrate operation has completed.
    4. If necessary, open ADMS Console and attach any previously detached databases.


    MULTI SITE (file replication)

    Hotfix Installation – applied to every Autodesk Data Management Server (ADMS).

    1. Reset the web service by typing 'iisreset' at a server command prompt.
    2. Run DL20621753.msp on an ADMS server to install the hotfix.
    3. Repeat the preceding steps for every ADMS server.
    4. Open one ADMS Console and migrate all unmigrated databases and libraries before proceeding.
      1. NOTE: It may be necessary to detach an unmigrated database if the update addresses a migration problem.
    5. Close the ADMS Console application.

    Database Update – applied ONCE from ONE Autodesk Data Management Server (ADMS).

    1. WARNING: DO NOT PROCEED until the hotfix has been successfully applied on ALL ADMS servers.
    2. Open a command prompt and navigate to the installed location of Connectivity.ADMSConsole.exe.
    3. Run ADMS b2bmigrate operation in command line mode:
      1. Example: Connectivity.ADMSConsole.Exe -Ob2bmigrate -VUadministrator -VPadmin_password -DBUsql_user -DBPsql_password
      2. NOTE: Replace 'admin_password' with the appropriate administrator password for the -VP switch.
      3. The last two command line parameters are required only if the 'sa' password is not the default password.
    4. A 'migration successful' dialog will display when the b2bmigrate operation has completed.
    5. If necessary, open ADMS Console and attach any previously detached databases.


    CONNECTED WORKGROUP (file and SQL replication)

    Hotfix Installation – applied to every Autodesk Data Management Server (ADMS) in all workgroups.

    1. Reset the web service by typing 'iisreset' at a server command prompt.
    2. Run DL20621753.msp on an ADMS server to install the hotfix.
    3. Repeat the preceding steps for every ADMS server in all workgroups.
    4. Open one ADMS Console on the Publisher workgroup and migrate all unmigrated databases and libraries before proceeding.
      1. NOTE: It may be necessary to detach an unmigrated database if the update addresses a migration problem.
    5. Close the ADMS Console application.

    Database Update – applied ONCE from ONE Autodesk Data Management Server (ADMS) on the Publisher workgroup ONLY.

    1. WARNING: DO NOT PROCEED until the hotfix has been successfully applied on ALL ADMS servers in all workgroups.
    2. Ensure that all workgroups are online and accessible before proceeding. Do not proceed until the Replication Status | Merge Information dialog
      shows "Waiting 60 second(s) before polling for further changes." for each replicated vault and library.
    3. Open a command prompt and navigate to the installed location of Connectivity.ADMSConsole.exe.
    4. Run ADMS b2bmigrate operation in command line mode:
      1. Example: Connectivity.ADMSConsole.Exe -Ob2bmigrate -VUadministrator -VPadmin_password -DBUsql_user -DBPsql_password
      2. NOTE: Replace 'admin_password' with the appropriate administrator password for the -VP switch.
      3. The last two command line parameters are required only if the 'sa' password is not the default password.
    5. A 'migration successful' dialog will display when the b2bmigrate operation has completed.


      1. NOTE: A successful migration may take some time as the database updates must be consumed by the subscriber workgroups.
    6. If necessary, open ADMS Console and attach any previously detached databases.

    Vault Client

    1. NOTE: The client hotfix only applies to Autodesk Vault Workgroup, Collaboration and Professional. (See the system requirements section.)
    2. Extract the ts15770173_client.msp file to a temporary directory on the workstation.
    3. Double-click on ts15770173_client.msp to install the hotfix.
    4. Install the hotfix on all Autodesk Vault workstations.

    Legal Notice

    Autodesk does not guarantee that you will be able to successfully download or implement any hotfix, utility, service pack or
    workaround, or any of the tips, tricks, examples or suggestions outlined in any Autodesk product support technical documents.
    Technical documents, hotfixes, utilities, service packs and workarounds are subject to change without notice to you. Autodesk
    provides technical documents, hotfixes, utilities, service packs and workarounds "as is" without warranty of any kind, whether
    express or implied, including warranties of merchantability and fitness for a particular purpose. In no event shall Autodesk or
    its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of data, or loss
    of business profits or special damages, that may occur as a result of implementing any hotfix, utility, service pack or workaround,
    or any suggestion outlined in any Autodesk product support technical document, even if Autodesk or its suppliers have been advised
    of the possibility of such damages.



    Copyright © 2012 Autodesk, Inc.