AutoCAD Structural Detailing 2012 Service Pack 4 Readme

Thank you for downloading AutoCAD Structural Detailing® 2012 Service Pack 4

This readme contains the latest information regarding the installation and use of the Service Pack. It is strongly recommended that you read the entire document before you apply the Service Pack to your product. For reference, you should save this document to your hard drive or print a copy.

Contents

This update may be applied to any licensed copy of AutoCAD Structural Detailing 2012 software installed as a stand-alone product or as part of a suite, with or without installed Service Packs 1, 2 and 3. This update includes Service Pack 1, 2 and 3 so you do not need to install them prior to installing Service Pack 4.

After installing Service Pack 4 it is strongly recommended that you install ASD 2012_HF1 and ASD 2012_HF2 which are the supplement fixes available for AutoCAD Structural Detailing 2012.

You can apply this Service Pack to the following Autodesk products running on all supported operating systems and languages. Be sure to install the correct Service Pack for your software.

32-bit Product
Service Pack
AutoCAD Structural Detailing 2012 ASD2012SP4_32bit.exe   

64-bit Product
Service Pack
AutoCAD Structural Detailing 2012 ASD2012SP4_64bit.exe

 

Return to Top

You can use this Service Pack with the following operating systems below.

Service Pack 2 (SP2) and Service Pack 3 (SP3) of the following:

Service Pack 1 (SP1) and Service Pack 2 (SP2) of the following:

The following Windows® 7 operating systems:

Return to Top

When you apply this Service Pack while running AutoCAD or AutoCAD LT, it is recommended that you do not click the "Automatically close applications and attempt to restart them after setup is complete" option. Instead, close AutoCAD or AutoCAD LT manually, and press "Ignore" at the prompt. It is also recommended that you reboot your system after installing the Service Pack.

Return to Top

Problems Reported with the Customer Error Reporting Utility

As a result of detailed information from customers who used the Customer Error Reporting Utility, a number of problems were identified and fixed. Updates have been made in the following commands and features:

Service Pack 1

Service Pack 2

Return to Top

General Updates in AutoCAD Structural Detailing

AutoCAD Structural Detailing 2012 Update 4 provides fixes for defects in the following areas:



AutoCAD Structural Detailing - Reinforcement

AutoCAD Structural Detailing - Steel

Return to Top

General Updates in AutoCAD

The following defects have been fixed:

3D Navigation Tools

Service Pack 1

Service Pack 2

3D Surface Modeling

Service Pack 1

Service Pack 2

Annotation Scaling

Service Pack 1

Service Pack 2

Array

Service Pack 2

ASM

Service Pack 2

Autoloader

Service Pack 1

Service Pack 2

Blocks

Service Pack 1

Service Pack 2

CUI (Customizable User Interface)

Service Pack 2

Digitizer

Service Pack 1

DGN Support

Service Pack 2

Display Drivers

Service Pack 1

Service Pack 2

DRAW2D

Service Pack 2

DWF

Service Pack 1

DWG

Service Pack 1

Dimensions

Service Pack 1

ETRANSMIT

Service Pack 1

Exchange

Service Pack 1

Express Tools

Service Pack 1

Export to Layout

Service Pack 2

External Reference (XREF)

Service Pack 2

Fields

Service Pack 2

General Editing

Service Pack 1

Hatch

Service Pack 1

Image

Service Pack 1

Inquiry

Service Pack 2

Layer

Service Pack 1

Layouts

Service Pack 2

MLeader

Service Pack 1

Service Pack 2

Model Documentation

Service Pack 2

Modify

Service Pack 1

Mtext

Service Pack 1

Service Pack 2

OLE (Object Linking & Embedding)

Service Pack 1

Service Pack 2

Open/Save

Service Pack 1

OSNAP

Service Pack 2

Other

Service Pack 1

Service Pack 2

Parametric Drawing

Service Pack 1

PDF Export

Service Pack 1

PDF Underlay

Service Pack 1

Performance

Service Pack 1

Service Pack 2

Plot

Service Pack 1

Service Pack 2

Publish

Service Pack 2

Purge

Service Pack 1

Ribbon

Service Pack 1

Service Pack 2

Snaps

Service Pack 1

Selection

Service Pack 1

Service Pack 2

Sheet Set Manager

Service Pack 1

Service Pack 2

Startup

Service Pack 2

Tables

Service Pack 1

Service Pack 2

Tool tips

Service Pack 2

Visual Basic for Application (VBA)

Service Pack 1

Service Pack 2

Visual Lisp

Service Pack 1

Visual Styles

Service Pack 1

Service Pack 2

External Reference

Service Pack 1

Zoom/Pan

Service Pack 1

Return to Top

The Service Pack 1 brings back the Array dialog functionality by introducing a new ARRAYCLASSIC command.  It also introduces the option to restore legacy Snap behavior by controlling it through the new SNAPGRIDLEGACY system variable:

ARRAYCLASSIC
Creates copies of objects in a regularly spaced rectangular or polar array.

SNAPGRIDLEGACY
1 – Always snap the cursor to the grid
0 – Only snap the cursor to the grid when AutoCAD prompts to specify a point

Return to Top

Return to Top

Before You Begin

As you prepare to install this Service Pack, keep the following in mind:

Back Up Custom Files

It is recommended that you back up all custom CUIX, MNR, and MNL files before you apply this Service Pack.

Administrative Privileges

During installation, you will be prompted for the original installation media or a network image. In order to apply this Service Pack, you must have administrative privileges to install and uninstall products.

Network Deployment

Administrators can deploy this Service Pack over a network using the Deployment Wizard.

About Your Product

After you install the Service Pack, updated product information displays in the About dialog box.

Reboot

After you install, it is recommended to reboot your system even if not prompted.

Return to Top

About Windows Command Line Switches

The following Microsoft Windows command line switches are built into this Service Pack:

Instructions about how to use the /e command line switch are included in the installation procedures that follow.

Return to Top

Apply This Service Pack to a Stand-Alone Installation

Follow these instructions to install this Service Pack on a single computer.

  1. Download the Service Pack and save it to any folder.
  2. If required, insert the product media (for example, the AutoCAD installation disc).
  3. Find the folder where you saved the Service Pack and double-click the executable (EXE) file.

Return to Top

Apply This Service Pack Through a Local Network

You can use InfoCenter to apply this Service Pack through your local network. Detailed instructions on how to set up patching through your local network are listed in the InfoCenter tab of the CAD Manager Control Utility Help.

Note: You can install the CAD Manager Control Utility from the product installation media. Select Install Tools and Utilities and then select Autodesk CAD Manager Tools.

Return to Top

Apply This Service Pack to a Network Administrative Image

The following distribution method applies only to administrative images created with the Deployment Wizard. After you complete these procedures, subsequent deployments of your product will include this Service Pack.

In all cases, append this Service Pack to the deployment. The only time it is appropriate to merge the Service Pack is if you intend to distribute the deployment through a group policy object.

The patch (Service Pack) file that you download contains an MSP (Microsoft Patch) file, which you extract from the executable file using the /e (extract) switch. For an example of the syntax, see step 2, below.

  1. From the Autodesk Product Support website, download the Service Pack EXE file to your local computer.
  2. On the Start menu (Windows), click Run. Enter the following information and click OK.

    <local_drive:>\<patch_name> /e <local_drive:>\< patch_name>.msp

  3. Insert the Autodesk media and launch setup.exe.
  4. Select Create Deployments. Click Next.
  5. On the Begin Deployment page, in the Specify the Deployment Location box, enter the shared network location where you would like to create an administrative image, or click Browse to find a location. Users install the product from this location.
  6. In the Specify a Deployment Name box, enter the name for your deployment.
  7. Continue through the Deployment wizard, open and configure the deployment in the product configuration page, click Add to find the Service Pack extracted in Step 2. Notice that the Service Pack has been added in the Include Service Pack(s) from local drive or local network box. Close and return to the product list.
  8. Follow the instructions in the Deployment wizard to complete the Service Pack deployment.

Return to Top

Uninstall This Service Pack

Windows XP

  1. From the Start menu (Windows), click Settings > Control Panel.
  2. In Control Panel, click Add or Remove Programs.
  3. In the Add or Remove Programs window, select the Show Updates option.
  4. Find the appropriate Service Pack in the list of programs. Click Remove.

Windows Vista and Windows 7

  1. From the Start menu (Windows), click Control Panel.
  2. Click Programs.
  3. Click Programs and Features.
  4. In the Programs and Features window, in the left pane, click View Installed Updates.
  5. Find the appropriate Service Pack in the list of updates. Click Uninstall.

Return to Top


Copyright ©2012 Autodesk, Inc.