<?xml version="1.0" encoding="utf-16"?>
<FeatureAutoname Version="1">
  <!--Created by Autodesk Inventor Version 15.0 Production Candidate-->
  <!--The schema of this file is subject to change without notice and is not guaranteed to remain the same from one release to the next.-->
  <Feature InternalName="ExtrudeFeature" ShowExtendedName="1" >
		<Format InternalName="DefaultFormat" FormatString="[Operation] x [Extents] x [Taper]" Default="[Operation] x [Extents] x [Taper]"/>
		<!--NotdistanceExtents include "To Next, To, Between, All"-->
		<Format InternalName="NotDistanceExtents" FormatString="[Operation] [Extents] x [Taper]" Default="[Operation] [Extents] x [Taper]"/>
  </Feature>
  <Feature InternalName="HoleFeature" ShowExtendedName="1" UseSubFormat="1">
    <!--Use different formats according to hole operation and thread type-->
    <Format InternalName="Simple_Drill" FormatString="[SimpleHole]" Default="[SimpleHole]"/>
    <Format InternalName="Simple_Counterbore" FormatString="[HoleType] [HoleOperation], [SimpleHole]" Default="[HoleType] [HoleOperation], [SimpleHole]"/>
    <Format InternalName="Simple_Countersink" FormatString="[HoleType] [HoleOperation], [SimpleHole]" Default="[HoleType] [HoleOperation], [SimpleHole]"/>
    <Format InternalName="Simple_Spotface" FormatString="[HoleType] [HoleOperation], [SimpleHole]" Default="[HoleType] [HoleOperation], [SimpleHole]"/>
    <Format InternalName="Clearance_Drill" FormatString="[FastenerSize], [SimpleHole]" Default="[FastenerSize], [SimpleHole]"/>
    <Format InternalName="Clearance_Counterbore" FormatString="[FastenerSize], [HoleType] [HoleOperation], [SimpleHole]" Default="[FastenerSize], [HoleType] [HoleOperation], [SimpleHole]"/>
    <Format InternalName="Clearance_Countersink" FormatString="[FastenerSize], [HoleType] [HoleOperation], [SimpleHole]" Default="[FastenerSize], [HoleType] [HoleOperation], [SimpleHole]"/>
    <Format InternalName="Clearance_Spotface" FormatString="[FastenerSize], [HoleType] [HoleOperation], [SimpleHole]" Default="[FastenerSize], [HoleType] [HoleOperation], [SimpleHole]"/>
    <Format InternalName="Tapped_Drill" FormatString="[ThreadInfo]" Default="[ThreadInfo]"/>
    <Format InternalName="Tapped_Counterbore" FormatString="[HoleType] [HoleOperation], [ThreadInfo]" Default="[HoleType] [HoleOperation], [ThreadInfo]"/>
    <Format InternalName="Tapped_Countersink" FormatString="[HoleType] [HoleOperation], [ThreadInfo]" Default="[HoleType] [HoleOperation], [ThreadInfo]"/>
    <Format InternalName="Tapped_Spotface" FormatString="[HoleType] [HoleOperation], [ThreadInfo]" Default="[HoleType] [HoleOperation], [ThreadInfo]"/>
    <Format InternalName="TaperTapped_Drill" FormatString="[TaperThreadInfo]" Default="[TaperThreadInfo]"/>
    <Format InternalName="TaperTapped_Countersink" FormatString="[HoleType] [HoleOperation], [TaperThreadInfo]" Default="[HoleType] [HoleOperation], [TaperThreadInfo]"/>
    <Format InternalName="TaperTapped_Spotface" FormatString="[HoleType] [HoleOperation], [TaperThreadInfo]" Default="[HoleType] [HoleOperation], [TaperThreadInfo]"/>
    <!--Sub formats are defined below-->
    <Format InternalName="SimpleHole" FormatString="Ø[HoleDiameter][xHoleDepth] [DepthString]" Default="Ø[HoleDiameter][xHoleDepth] [DepthString]"/>
    <Format InternalName="HoleOperation" FormatString="Ø[HeadDiameter] x [HoleHeadDepthOrAngle]" Default="Ø[HeadDiameter] x [HoleHeadDepthOrAngle], "/>
    <Format InternalName="ThreadInfo" FormatString="[ThreadDesignation][xThreadDepth] [ThreadDepthString][xHoleDepth] [DepthString]" Default="[ThreadDesignation][xThreadDepth] [ThreadDepthString][xHoleDepth] [DepthString]"/>
    <Format InternalName="TaperThreadInfo" FormatString="[ThreadDesignation][xHoleDepth] [DepthString]" Default="[ThreadDesignation][xHoleDepth] [DepthString]"/>
  </Feature>
  <Feature InternalName="ChamferFeature" ShowExtendedName="1" >
		<Format InternalName="OneDistance" FormatString="[Distance1]" Default="[Distance1]"/>
		<Format InternalName="DistanceAndAngle" FormatString="[Distance1] x [Angle]" Default="[Distance1] x [Angle]"/>
		<Format InternalName="TwoDistances" FormatString="[Distance1] x [Distance2]" Default="[Distance1] x [Distance2]"/>
  </Feature>
  <Feature InternalName="LoftFeature" ShowExtendedName="1" >
		<Format InternalName="DefaultFormat" FormatString="[Operation]" Default="[Operation]"/>
  </Feature>
  <Feature InternalName="CoilFeature" ShowExtendedName="1" >
		<Format InternalName="PitchAndRevolution" FormatString="[Operation] x [Pitch] x [Revolution] x [Taper]" Default="[Operation] x [Pitch] x [Revolution] x [Taper]"/>
		<Format InternalName="RevolutionAndHeight" FormatString="[Operation] x [Height] x [Revolution] x [Taper]" Default="Operation] x [Height] x [Revolution] x [Taper]"/>
		<Format InternalName="PitchAndHeight" FormatString="[Operation] x [Pitch] x [Height] x [Taper]" Default="[Operation] x [Pitch] x [Height] x [Taper]"/>
		<Format InternalName="Spiral" FormatString="[Operation] x [Pitch] x [Revolution]" Default="[Operation] x [Pitch] x [Revolution]"/>
  </Feature>
  <Feature InternalName="SweepFeature" ShowExtendedName="1" >
		<Format InternalName="DefaultFormat" FormatString="[Operation]" Default="[Operation]"/>
  </Feature>
  <Feature InternalName="RibFeature" ShowExtendedName="1" >
		<!-- [xTaper] means this item already contains prefix: " x "-->
		<Format InternalName="ExtentsToNext" FormatString="[Extents] x [Thickness][xTaper]" Default="[Extents] x [Thickness][xTaper]"/>
		<Format InternalName="ExtentsFinite" FormatString="[Extents] x [Thickness] x [Width][xTaper]" Default="[Extents] x [Thickness] x [Width][xTaper]"/>
  </Feature>
  <Feature InternalName="RevolutionFeature" ShowExtendedName="1" >
		<Format InternalName="AngleExtents" FormatString="[Operation] x [Angle]" Default="[Operation] x [Angle]"/>
		<!--NotdistanceExtents include "To Next, To, Between, Full"-->
		<Format InternalName="NotAngleExtents" FormatString="[Operation] [Extents]" Default="[Operation] [Extents]"/>		
  </Feature>
  <Feature InternalName="RectangularFeature" ShowExtendedName="1">
  <!-- [xDistance1] means this item already contains prefix: " x "-->
		<Format InternalName="DefaultFormat" FormatString="x [Count1][xDistance1], x [Count2][xDistance2]" Default="x [Count1][xDistance1], x [Count2][xDistance2]"/>
		<Format InternalName="OnlyDirection1" FormatString="x [Count1][xDistance1]" Default="x [Count1][xDistance1]" />
		<Format InternalName="OnlyDirection2" FormatString="x [Count2][xDistance2]" Default="x [Count2][xDistance2]" />
  </Feature>
  <Feature InternalName="CircularFeature" ShowExtendedName="1" >
		<Format InternalName="DefaultFormat" FormatString="x [Count] x [Angle]" Default="x [Count] x [Angle]"/>
  </Feature>
  <Feature InternalName="SplitFeature" ShowExtendedName="1" >
    <Format InternalName="DefaultFormat" FormatString="[SplitMethod]" Default="[SplitMethod]"/>
  </Feature>
  <Feature InternalName="DraftFeature" ShowExtendedName="1" >
    <Format InternalName="DefaultFormat" FormatString="[DraftAngle]" Default="[DraftAngle]"/>
  </Feature>
  <Feature InternalName="ThreadFeature" ShowExtendedName="1" >
    <Format InternalName="DefaultFormat" FormatString="[ThreadDesignation] - [ThreadClass] x [ThreadLength]" Default="[ThreadDesignation] - [ThreadClass] x [ThreadLength]"/>
	<Format InternalName="FullLengthNoClass" FormatString="[ThreadDesignation] - [ThreadClass]" Default="[ThreadDesignation] - [ThreadClass]"/>
	<Format InternalName="OnlyThreadDesignation" FormatString="[ThreadDesignation]" Default="[ThreadDesignation]"/>
  </Feature>
  <Feature InternalName="FilletFeature" ShowExtendedName="1">
    <!--MaxNumberOfItems represents the max number of radius to be shown, more radius will be shown as "...", and "0" means all items-->
    <Format InternalName="DefaultFormat" FormatString="[AllRadius]" Default="[AllRadius]" MaxNumberOfItems="10"/>
  </Feature>
</FeatureAutoname>
