Autodesk Simulation Moldflow Insight - Solvers 2013 Service Pack 2 README

Notice to Autodesk Moldflow Insight - Solvers Customers

In a continuing effort to provide high quality products, Autodesk has released Autodesk Moldfow Insight - Solvers 2013 Service Pack 2,
which fixes or addresses a variety of issues pertaining to Autodesk Moldflow Insight - Solvers 2013. This README file highlights what
has been fixed. 

Requirement:
Note: There are two parts to Autodesk Simulation Moldflow Insight; the Solvers and Synergy user interface. Both have a 2013 Service Pack 2
both of which must be installed. Install Solvers SP2 first, followed by the Synergy SP2.
1. Before installing Autodesk Simulation Moldflow Insight - Solvers 2013 Service Pack 2, check that you already have either Service Pack 1
   or the Multilanguage release installed on your computer. 
2. Once you have installed Autodesk Simulation Moldflow Insight - Solvers 2013 Service Pack 2, you must also install Autodesk Simulation
   Moldflow Insight – Synergy 2013 Service Pack 2. 

Summary of issues addressed in Autodesk Simulation Moldflow Insight - Synergy 2013 Service Pack 2
* Mesh thickness always displays as 0 on legacy study containing IGES geometry. (Support issue)
* Improve usability of spaceball function. (Support issue)
* Improve error handling when an abnormal operation is occured. (Customer Error Report, CER)
* Improve error handling when an invalid udm file is used. (Customer Error Report, CER)
* Mesh thickness diagnostic shows as 0 when a UDM file is meshed to Dual Domain mesh. (Support issue)

Summary of issues addressed in Autodesk Simulation Moldflow Insight - Solvers 2013 Service Pack 2
* Part volume calculation in the logs is incorrect. (Support issue)
* Fixed a crash in 3D Flow for when using annular beam elements analysis. (Support issue)
* Improve thermoset process results in Cool (FEM). (Support issue) 
* Improve 3D time to reach ejection temperature plot. (Support issue)
* 3D Warp for thermosets does not take into account the tensile modulus results from fiber. (Support issue)
* Incomplete analysis on a large model shown no results in Solvers but Job manager doesn't show that analysis is failed. 
* Differential shrinkage result is wrong for structural beams. 
* Couldn't define mesh density for the first selected surface or curve. (Support issue)
* Runstudy always returns Success even when an analysis fails. 
* CAD body will be moved to active layer after "Show Contact Interfaces" Enabled. (Support issue)

Material Database Changes
Summary of changes to the Thermoplastics Material database since the Autodesk Simulation Moldflow Insight - Solvers 2013 release:
Total number of suppliers: 458 
    New suppliers added: 9 
    Suppliers deleted: 2 

Total number of grades: 8847 
    Grades added: 148 
    Grades deleted: 23 
    Grades amended: 69 

Specific data: 
    Grades with specific pvT data: 5430 
    Grades with Long Fiber Length data: 25 
    Grades with Cystallization data: 19 
    Grades with Default shrinkage data: 2105 
    Grades with Crystallization – Residual Stress data: 1190 
    Grades with Crystallization – Residual Strain data: 1228 
    Grades with RSC Fiber - Residual Stress data: 742 
    Grades with RSC Fiber - Residual Strain data: 798 
    Grades with Crystallization RSC Fiber - Residual Stress data: 524 
    Grades with Crystallization RSC Fiber - Residual Strain data: 547

Known Issues
When uninstalling the Autodesk Simulation Moldflow Insight - Solvers 2013 SP2 patch, it is imperative that you also uninstall Autodesk
Simulation Moldflow Insight - Synergy 2013 SP2. If you uninstall the Autodesk Simulation Moldflow Insight 2013 SP2 patch, the Autodesk
Simulation Moldflow Insight - Solvers 2013 will cease to function. To solve this issue, either reinstall the SP2 patch, or uninstall
Autodesk Simulation Moldflow Insight 2013 and reinstall it.