AutoCAD® MEP 2008 Service Pack 1

This Readme contains the latest information regarding the installation and use of this service pack. It is strongly recommended that you read this entire document before you apply the service pack to your product. For your reference, you should save this Readme to your hard drive or print a copy.

Contents


Who Should Install the Service Pack?

Service Pack 1 is for the following Autodesk products running on all supported operating systems and languages. Be sure to install the correct service pack for your software.

32-bit Product

Service Pack

AutoCAD MEP 2008

AutoCad_MEP_2008sp1.exe

AutoCAD Revit MEP Suite 2008

ARS_AutoCad_MEP_2008sp1.exe


Supported Operating Systems

This service pack can be used with the following operating systems:


Information for Windows Vista Users


Primary Issues Resolved by the Service Pack

Problems Reported with the Customer Error Reporting Utility

As a result of detailed information from customers who used the Customer Error Reporting Utility, a number of problems were identified and fixed in the following areas:

AutoCAD MEP 2008

·         Multi-view Parts

·         Schematic Lines

AutoCAD Architecture 2008

AutoCAD 2008

 

AutoCAD MEP Updates

Changes include the following:

Electrical

·         Devices and Panels with an model representation will be detected by Interference Detection if they collide with other MEP objects.

·         The system filter for the Circuits property during WireAdd will update correctly.

·         The connection a wire with a circuit assigned has with a device will be maintained after using the Publish command.

HVAC

·         CER: Changing the connection types on a duct fitting to a flanged connection type no longer causes a fatal error.

·         Flanges are now displayed on duct fittings within a model view, when the flange values are specified on the duct fittings.

·         Duct fittings endcap snaps to the open end of vertical or sloped duct segments properly.

 

Piping

·         Pipe segments copied from one pipe run to another pipe run will align properly to the new pipe run.

·         Using AecConvertto3dSolid command will convert pipe fittings more successfully to 3d Solids.

·         Auto-Routing pipe between two pipe connectors with an elbow using custom sizing will add the needed angle to the part to resolve the connection in the current drawing.

·         When a single line pipe is being crossed multiple times by another AutoCAD MEP object at a different elevation, the hidden line gap is properly applied to the pipe.                             

Plumbing

·         Plumbing Lines and Plumbing Fittings will continue to obey Annotation Scale after changing the drawing  units and cancel the Drawing Setup dialog.

Schematics

·         CER: Performing a Fillet or Join on schematic lines with schematic symbols anchored to them no longer causes a fatal error.

System

·         Etransmit will no longer enter an infinite loop of prompting to save the drawing.

·         CER: Grip editing the location of MEP objects with various setting combinations of Object Snaps, Snap, Ortho, Polar, Dynamic UCS and Dynamic Input settings will no longer cause a fatal error.

·         CER: Erasing an inline MvPart will no longer cause a fatal error.

·         CER: The adding of automatic properties to a Property Set Definition that is generated automatically when objects are added to the drawing will no longer cause a fatal error.

·         Switching to the Extended Data tab in the Properties Palette with AutoCAD objects selected will no longer cause Resource Manager errors.

·         CER: Part Catalogs containing the “’” symbol will no longer cause a fatal error during Catalogtest.

·         CER: Saving of concurrently open drawing which contain annotative dimensions no longer cause a fatal error within Content Builder.

·         CER: Parametric parts which produce an invalid solid will no longer cause a fatal error.  Instead the erroneous solid will not be displayed.

 

 

AutoCAD Architecture Updates

Changes include the following:

AEC Details

AEC Dimensions

Annotation Scaling

Camera

Design Center

Drawing Management

Export to AutoCAD

IFC

Keynoting

Schedules

Spaces

Structural Members

Walls

Xrefs

Other

 

AutoCAD Updates

Other changes include the following:

.NET API

64-Bit

Annotation Scaling

Attributes

 

Blocks

Communication Center

Dashboards

Data Extraction

Dimensions

Display

DWG

E-Transmit

Fields

 

Hatch

Image

Layouts

Multileader

MText

Open/Save

Object Snap

PDF Export

Performance Tuner

Plot

Tables

Tool Palette

Visual Styles

XREF

Known Issues With This Service Pack

·         Problem: After applying the Service Pack 1, all dashboard control panels are displayed regardless of the selected workspace.
Workaround: Make the desired workspace current.


 

General Installation Information

Before You Begin

As you prepare to install the service pack, keep these points in mind:

Back up all custom CUI, MNR, and MNL files before applying this service pack.

·         Administrative Privileges

During installation, you will be prompted for the original installation media or network image. You must have administrative permissions to install and uninstall products in order to successfully apply service packs.

·         Network Deployment

Administrators can deploy the service pack over a network using the Deployment wizard.

About Windows Command Line Switches

Two Microsoft® Windows® command line switches are built into this service pack:

Instructions about how to use the /e command line switch is included in the procedures that follow.


Installation Instructions

Apply This Service Pack to a Stand-Alone Installation

Follow these instructions to install a service pack on an individual computer.

To update a stand-alone installation

  1. Download the service pack and save it to any folder.
  2. Insert the product media (for example, AutoCAD).
  3. Find the folder where you saved the service pack and double-click the executable (EXE) file.

Apply This Service Pack Through a Local Network

You can use Communication Center to apply this service pack through your local network. Detailed instructions on how to set up patching through your local network are listed in the Communication Center tab of the CAD Manager Control Utility help.

NOTE: The CAD Manager Control Utility can be installed from the product installation media by selecting "Install Tools and Utilities" and then selecting the Autodesk CAD Manager Tools 4.0.

Apply This Service Pack to a Network Administrative Image

The following distribution methods apply only to administrative images created with the Deployment wizard. After you complete these procedures, any subsequent deployments of the product will include the service pack updates.

In all cases, please "Append" the service pack to a deployment. The only time it is appropriate to "Merge" a service pack is if you intend to distribute the deployment through a group policy object.

The patch (service pack) file that you download contains an MSP (Microsoft Patch) file, which you extract from the executable file using the /e (extract) switch. For an example of the syntax, see step 2, below.

To add the service pack to a new administrative image

  1. From the Autodesk Product Support website, download the service pack EXE file to your local computer.
  2. On the Start menu (Windows), click Run. Enter information using the following syntax and click OK.

<local_drive:>\<patch_name>\ /e <local_drive:>\< patch_name>.msp

  1. Insert the Autodesk media and launch setup.exe.
  2. Select "Create Deployments," then click Next.
  3. On the "Begin Deployment" page, in the "Specify the Deployment Location" box, enter the shared network location where you would like to create an administrative image, or click "Browse" to find a location. Users install the product from this location.
  4. In the "Specify a Deployment Name" box, enter the name for your deployment.
  5. Continue through the Deployment Wizard, and Configure when allowed. On the "Include Service Packs Page," click "..." to browse to the service pack extracted in Step 2. Notice that the service pack has been added in the "Service Packs Included in this Deployment" box. Click Configuration Complete.
  6. Follow the instructions in the Deployment wizard to complete the service pack deployment.

To apply the service pack to an existing administrative image

  1. From the Autodesk Product Support website, download the service pack EXE file to your local computer.
  2. On the Start menu (Windows), click Run. Enter the following information and click OK.

<local_drive:>\<patch_name>\ /e <local_drive:>\< patch_name>.msp

  1. Browse to the location of the existing Administrative image.
  2. Select Modify Deployment Name.
  3. On the "Begin Deployment" page, you may change the name of the existing deployment in the "Specify the Deployment Name" box.
  4. Continue through the Deployment Wizard, and Configure when allowed. On the "Include Service Packs" page, click "..." to browse to the service pack extracted in Step 2. Notice that the service pack has been added in the "Service Packs Included in this Deployment" box. Click Configuration Complete.
  5. Follow the instructions in the Deployment wizard to complete the service pack deployment.

To Uninstall This Service Pack

NOTE: Service Pack cannot be uninstalled when the product is deployed with a merged Service Pack.

Windows 2000 and XP

  1. On the Start menu, click Settings > Control Panel.
  2. Double-click "Add or Remove Programs".
  3. In Windows XP, select the Show Updates option.
  4. Find the appropriate service pack in the list of programs and click Remove.

Vista

  1. On the Start menu, click Control Panel.
  2. Click Programs.
  3. Click Programs and Features.
  4. In the Programs and Features window, in the left pane, click View Installed Updates.
  5. Find the appropriate service pack in the list of updates and click Uninstall.

Files Patched by This Service Pack

Depending on the product and the type of installation, this service pack updates the following files:

AutoCAD MEP 2008

o    AecbHvacBase.dbx

o    AecbPipeBase.dbx

o    AecbElecBase.dbx

o    AecbTools.dbx

o    AecbBldSrv.dbx

o    AecbCol.dbx

o    AecbPartBase.dll

o    AecbPlumbingBase.dbx

o    ABS.dll

o    ABSCadManager.dll

o    ABSDesign.dll

o    ABSDocument.dll

o    AecbUiTools.arx

o    AecbGuiBldSrv.arx

o    AecbElec.arx

o    AecbHvac.arx

o    AecbPipe.arx

o    AecbPlumbing.arx

o    AecbCatalog.dll

o    AecbCatalogEditor.exe

o    AecbContentBuilder.arx

o    AecbPartDef.arx

o    AecbUiBldSrv.arx

o    AecbUiCol.arx 

o    AecbXTools.dll

o    AecbXTools.tlb

o    AecbXToolsHelp.dll

o    AecbXToolsLoader.dll

o    AecbXBldSrv.dll

o    AecbXBldSrv.tlb

o    AecbXBldSrvHelp.dll

o    AecbXBldSrvLoader.dll

o    AecbXGuiBldSrv.dll

o    AecbXGuiBldSrv.tlb

o    AecbXGuiBldSrvLoader.dll

o    AecbXPlumbingBase.dll

o    AecbXPlumbingBase.tlb

o    AecbXPlumbingBaseHelp.dll

o    AecbXPlumbingBaseLoader.dll

o    AecbXUIBldSrv.dll

o    AecbXUIBldSrv.tlb

o    AecbXUIBldSrvHelp.dll

o    AecbXUiBldSrvLoader.dll

o    AecbPartBaseMgd.dll

o    AecbPartBaseMgd.xml

o    AecbBldSrvMgd.dll

o    AecbElecBaseMgd.dll

o    AecbHvacBaseMgd.dll

o    AecbPipeBaseMgd.dll

o    AecbPlumbingBaseMgd.dll

AutoCAD Architecture 2008

AutoCAD 2008


Copyright ® 2007 Autodesk, Inc.