Readme for the AutoCAD Civil 3D 2008 Autodesk Vault 2009 (Server) Support Patch

In a continuing effort to provide high quality products, Autodesk has released the AutoCAD Civil 3D 2008 - Autodesk Vault 2009 (Server) Support Patch. AutoCAD Civil 3D 2008 includes the Autodesk Data Management Server ADMS 2008 and AutoCAD Civil 3D 2009 includes the Autodesk Vault 2009 (Server) for AutoCAD Civil 3D version. ADMS 2008 and Autodesk Vault 2009 (Server) cannot be installed side-by-side on the same machine. This support patch enables you to connect to Autodesk Vault 2009 (Server) from AutoCAD Civil 3D 2008 (with Service Pack 2 installed), allowing you to upgrade to the new version Autodesk Vault 2009 (Server) independent from your upgrade to Civil 3D 2009.

NOTE : Applying this support patch does not allow you to use AutoCAD Civil 3D 2009 drawings with ADMS 2008.

This Readme contains information regarding the installation and use of this support patch. It is strongly recommended that you read this entire document before you apply the support patch to your product. For your reference, you should save this Readme to your hard drive or print a copy.

Installation Requirements

Recommendations for Usage:

Who Should Install This Support Patch?

This support patch can be applied only to versions of AutoCAD Civil 3D 2008 with Service Pack 2 installed and running on English-language and non-English-language operating systems. If you have not installed Service Pack 2, you will receive an error message when attempting to install this service pack.

General Installation Information

To successfully install the AutoCAD Civil 3D 2008 - Autodesk Vault 2009 (Server) Support Patch, please complete the following steps prior to installing the support patch.

  1. Uninstall Autodesk Vault Explorer 2008.
  2. Uninstall Autodesk Design Review.
  3. Install Autodesk Vault 2009 (Client) from your AutoCAD Civil 3D 2009 product media.

Applying This Support Patch

  1. Download C3D2008_Vault2009_support.exe and save it to any folder.
  2. Insert your AutoCAD Civil 3D 2008 media into your media drive.
  3. Navigate to the folder where you saved the support patch.
  4. Double-click the executable file for the support patch to install it.

 


Copyright (c) 2007 Autodesk, Inc.