AutoCAD® Map 3D 2012 –
Wastewater Extension Readme
Thank you for downloading the AutoCAD Map 3D 2012 Wastewater Extension.
This
readme contains the latest information regarding the installation and use of
this extension.
It is strongly recommended that you read this entire document before you apply
this extension to your product. For reference, please save this document to
your hard drive or print a copy.
Contents
· Files Installed by This Extension
This update applies to all language versions of the following products:
· AutoCAD® Map 3D 2012
· AutoCAD® Map 3D Enterprise 2012
Note that the extension is only available in English and German.
· AutoCAD Map 3D Enterprise 2012 Wastewater Extension
· AutoCAD Map 3D Enterprise 2012 Wastewater Extension for Administrator
These installers contain the import and export functionality for the Wastewater module. Supported file formats are: ISYBAU 1996/2001, ISYBAU 2006, ATV-M 143-2, ATV-DVWK-M 150-1, EN-13508-2
The extension also contains the classification functionality for the Wastewater features.
Main features and enhancements in the extension:
· Enhanced inspection editor to improve the daily work with sections, manholes and inspections.
· Possibility to open the pictures from the inspection editor (click the icons under the section graphic).
· Show one inspection group containing two inspections in the side view - one at the top, one at the bottom.
· New function / option to ignore conflicts during import and add it to the protocol.
· The data can be imported; and conflicts can be stored and resolved later.
· Possibility to store conflicts, i.e. material in import file and material in database into one table per import and wastewater object.
· New section report to print out section information with a graphic similar to the side view of the inspection editor. The report can be called from the form of the section or the inspection.
· Note that this report works only for AutoCAD Map 3D Enterprise 2012.
· Possibility to re-create the geometry of observation points from a section. It is also possible to create connection points (Fittings) from the section observations points.
· Pictures are directly stored in the observation objects instead of storing them in the document manager.
· They can be viewed from the forms of the observation data of section, manhole and site.
· Enhanced import and export of heights, especially in 2D – industry models.
· Correct assignment of function type for connecting lines and sections (WW_SECTION.ID_FUNCTION).
· Enhanced management of short values for domain tables (*_TBD). In the enhanced process it is possible to extend the domain table - before the import - with new custom values (the short_value has to be included). Then the import will consider the custom value if the value found (e.g. material) does not match a default known value.
· Enhancement of import of connecting lines. The import used to import connecting points from connecting lines always as fittings, if the connecting line was connected to a manhole and a fitting; the import would create an additional fitting in the place of the manhole. In the enhanced process the import recognizes the existing manhole – same name - and does not create an additional fitting.
· Enhancement of profile height/width for sections and connecting lines for manholes with non-circular diameters.
· Enhanced import and export of heights, especially in 2D documents.
· Enhancements of the exported attributes. The export process is more complete as it exports nearly all the attributes that were imported.
· Correct node types while exporting and correct date and time formats.
To install the Wastewater Extension
Note: You must have administrative privileges on your Microsoft Windows operating system.
Download the appropriate version of the extension (32-bit or 64-bit) based on your operating system.
1. On the computer where the product is installed, close all software applications.
2. Note that you must have the Autodesk Infrastructure Administrator 2012 installed.
3. Download the following files: “CKE_WasteWater.msi” and “CKE_WWForAdmin.msi” to a temporary location on your local computer, for example, C:\Temp.
4. Execute the MSI file. The installer will automatically detect the Infrastructure Administrator on your computer.
Files Installed by This Extension
The following files will be added to the [product]\bin directory (both 32-bit and 64-bit Machine):
Topobase.Modules.WasteWater.Extension.dll
Topobase.Modules.WasteWater.Extension.tbp
Topobase.Modules.WasteWater.DinEn13508_2.dll
Topobase.Modules.WasteWater.DinEn13508_2.tbp
Topobase.Modules.WasteWater.Dwa.dll
Topobase.Modules.WasteWater.Dwa.tbp
Topobase.Modules.WasteWater.Isybau.dll
Topobase.Modules.WasteWater.Isybau.tbp
The Administrator installer will additionally copy the following file to the directory [product]\Template\Client\Modules\WasteWater\Report:
WW Conflict Report.xml
The detailed documentation of the Wastewater Extension is available in German language at www.autodesk.com/map3d-countrykits
Copyright © 2011 Autodesk, Inc.