Thank you for downloading AutoCAD® MEP 2012 Service Pack 2
This readme contains the latest information regarding the installation and use of the Service Pack. It is strongly recommended that you read the entire document before you apply the Service Pack to your product. For reference, you should save this document to your hard drive or print a copy.
Contents
You can apply this Service Pack to the following Autodesk products running on all supported operating systems and languages. Be sure to install the correct Service Pack for your software.
NOTE: If you have a side-by-side installation of AutoCAD MEP 2012 with AutoCAD 2013 and AutoCAD MEP 2013, uninstalling AutoCAD MEP 2012 Service Pack 2, may cause AutoCAD MEP 2012 to fail during launch. To work around, uninstall and reinstall both AutoCAD MEP 2012 and Service Pack 2.
32-bit Product |
Service Pack |
| AutoCAD MEP 2012 | AutoCAD_MEP_2012_SP2_32bit.exe |
64-bit Product |
Service Pack |
| AutoCAD MEP 2012 | AutoCAD_MEP_2012_SP2_64bit.exe |
You can use this Service Pack with the following operating systems below.
Service Pack 2 (SP2) and Service Pack 3 (SP3) of the following:
Service Pack 1 (SP1) and Service Pack 2 (SP2) of the following:
The following Windows® 7 operating systems:
When you apply this Service Pack while running AutoCAD MEP, it is recommended that you do not click the "Automatically close applications and attempt to restart them after setup is complete" option. Instead, close AutoCAD MEP, and press "Ignore" at the prompt. It is also recommended that you reboot your system after installing the Service Pack.
As a result of detailed information from customers who used the Customer Error Reporting Utility, a number of problems were identified and fixed. Updates have been made in the following commands and features:
AutoCAD MEP Service Pack 1
AutoCAD MEP Service Pack 2
AutoCAD Architecture Service Pack 1
AutoCAD Architecture Service Pack 2
AutoCAD Service Pack 1
AutoCAD Service Pack 2
The following AutoCAD MEP defects have been fixed:
Auto Layout
Service Pack 1
- In some cases, copying and pasting an object in 2D or 3D view causes the object to rotate incorrectly.
Cable Tray
Service Pack 2
- Crash when switching to 3D view using Cable Tray Model.
- Some Cable tray system types are not saved in German version.
Display
Service Pack 1
- The symbol of inline mvparts might be offset under 1-line display configuration.
- There is a gap between the pipe connector and some special inline MV part symbol connectors.
Service Pack 2
- Some duct fittings do not display when their width < height.
- Duct hatch floating in space upon file open till OBJRELUPDATE.
- The pattern of Flex duct might shows too large circles after export to autocad.
Duct
Service Pack 1
- In some cases, the transition elbow does not get added automatically when the duct is resized.
- AutoCAD MEP crashes intermittently when adding a duct fitting or when changing the base point of a fitting.
- Duct instant sizing does not update the duct size in certain cases.
- In some cases, the size of a Cross fitting is not calculated correctly.
- Duct sizing tool adds the duct fitting in the wrong layer.
Service Pack 2
- Add branch lager than 80mm might cause a fatal error in some special drawings.
- Error message appears if connecting ducts with no RP using ducttransitionutility.
- In German version, the product may hanger during routing a round branch from rectangular duct.
Electrical
Service Pack 1
- Refediting a circuit drawing could lead to lost data.
- Some devices do not align to objects correctly.
Labels
Service Pack 1
- LabelCurveAdd does not allow preselection.
Multi-View Parts
Service Pack 1
- MvPart Catalog status warning dialog displays when importing certain custom catalogs.
- Some customized MvParts display incorrectly.
Pipe
Service Pack 1
- Connection breaks occur when editing MEP 2011 pipe runs in MEP 2012.
- Copying pipes rotates the duplicate pipes.
- Hubs do not insert automatically when laying out sloped pipes.
Tool Based UI
Service Pack 1
- The Properties palette does not update the parameters when changing fittings.
- Instant sizing does not automatically calculate size.
Miscellaneous
Service Pack 1
- Duct object becomes unresponsive if its value us set using an API.
- Creating or opening drawings with external references or with walls very close to each other, causes AutoCAD MEP to crash.
- Insulation for Pipe fittings display incorrectly.
- AutoCAD MEP hangs when generating a 2D section which includes a special MV-part.
- Interference Detection does not work if a drawing with external references or with walls very close to each other, is rotated.
- Catalog editor crashes if the .NET3.5 Framework is not installed.
Service Pack 2
- In some cases, when 2-Line pipes are plotted to PDF, DWF or DWFx, some lines of pipe will be missing.
- If you select one blank new Plumbing Fitting in one plumbing line run, you will meet one crash.
- There is one resource leak when resize the Interference Detection palette.
- Wblock the object from this file and runs the memory full.
The following AutoCAD Architecture defects have been fixed:
AEC Dimension
Service Pack 2
- Dimension lines created in previous versions of AutoCAD Architecture might not display in AutoCAD Architecture 2012.
Drawing Manager
Service Pack 1
- Selecting a sheet with a long name may cause unexpected behavior in AutoCAD Architecture.
- Opening a project with a large number of files in a 64-bit machine may cause AutoCAD Architecture to crash.
IFC
Service Pack 1
- Space containment does not work on a 64-bit operating system.
Installation
Service Pack 2
- Installing Service Pack 1 on Nordic version of AutoCAD Architecture 2012 displays an Installer Information error message.
- Installing Service Pack 1 in silent mode on Nordic version of AutoCAD Architecture 2012 fails.
Multi-View Block
Service Pack 1
- Exporting multi-view blocks to AutoCAD may result in an incorrect size.
Profile
Service Pack 1
- Some AEC ARX files are loaded when running AutoCAD Architecture with an AutoCAD profile.
Renovation
Service Pack 1
- Renovation function fails when you add a door or window object during renovation mode.
- Sometimes the renovation toggle remains enabled even after exiting the renovation mode.
Section
Service Pack 1
- Building geometry may change after you activate and then disable the live section.
- Roof or roof cap solid hatch might be displayed in section incompletely.
Space/Zone
Service Pack 1
- Some merged space areas are calculated incorrectly.
- When the unit area is inconsistent with its unit length, the calculated space area might be inaccurate.
Structural Member
Service Pack 1
- Adjusting column grid can cause beams to lose connection with the columns.
Tag
Service Pack 1
- Adding tags for doors on multiple reference copies may cause unexpected behavior in AutoCAD Architecture.
Wall
Service Pack 2
- Some body modifiers might not display after installing Service Pack 1.
Service Pack 1
- REPOSITIONALONG command does not work for doors and windows.
- Running the JOIN command on two connected walls may cause unexpected behavior in AutoCAD Architecture.
- When you offset a wall using another wall with the same direction as the reference, the offset wall may be created in the opposite direction.
- The Below Cut Plan display component of doors or window may not display.
The following AutoCAD defects have been fixed:
3D Navigation Tools
Service Pack 1
- 3DConnexion settings are not being remembered after changes are made.
- 3Dconnexion device will not cancel the current command.
Service Pack 2
- AutoCAD may become unstable after switching between a 3D Viewport to a 2D Viewport.
- "Keep Scene Upright" in 3DConnexion Settings dialog cannot be changed.
- Unknown command "SPACEMOUSEACTION" and device is not working when using 3DConnexion device.
3D Surface Modeling
Service Pack 1
- With dynamic input off dragging the height handle of an extruded line will not always stretch by the value and direction of the drag.
- AutoCAD may become unstable when rebuilding a helix to a spline where the selection was not dropped.
Service Pack 2
- AutoCAD may become unstable after using SAVEAS on some drawings that have been run through recover.
Annotation Scaling
Service Pack 1
- AutoCAD may become unstable while attempting to load a DCL file with errors from a long file name.
- Tooltip does not appear when Additional tool tip string is set in “AcEdInputPointMonitor::monitorInput”.
- API fix: This fix will respect the custom color, line pattern and line weight when selecting the entities including external reference.
Service Pack 2
- MTEXT column width can collapse to zero when XREF is bound to the parent drawing.
- Annotative MTEXT column width can collapse to zero when drawing is saved and reopened.
Array
Service Pack 2
- AutoCAD may become unstable when using the ARRAYCLASSIC dialog with solid entities selected and clicking on the preview button.
- On a 32bit Operating system using the ARRAYCLASSIC command preview with a large number of items selected, you may get a warning "Too many objects would be created."
- On a 32bit Operating system using the ARRAYCLASSIC command you may encounter objects on locked layers being removed without a warning dialog.
- Array blocks may not display when attached as an XREF.
ASM
Service Pack 2
- AutoCAD may become unstable when drawings contain loft surface on different layers and saved to older drawing versions such as 2004.
Autoloader
Service Pack 1
- Autoloader fails when SeriesMax parameter set to linked.
- Autoloader loads partial CUI but may not display it when the bundle is removed and reinstalled.
- When platform="AutoCAD*", bundles will be load on ACAD and Vertical.
- Using Autoloader to add custom CUI files that contain WPF Custom Controls will not work as it needs a registry entry.
Service Pack 2
The AutoCAD options paths may become shortened when the Inventor Fusion Plugin is installed.
Autoloader fails to load a modified CUIx file.
ACFusion.cuix keeps getting added back to AutoCAD even when unloaded.
Blocks
Service Pack 1
- AutoCAD may become unstable while snapping to blocks containing OLE objects.
- Editing attribute text in EATTEDIT dialog sometimes results in a fatal error.
- When a drawing is saved from within the Block Editor, the entire content of the drawing is sometimes lost and replaced with the content of the block being edited.
- Sometimes there is a delay while trying to modify blocks containing a Block Table Parameter.
- AutoCAD becomes unstable when entering the block editor, attempting to edit a dynamic block which has geometry on a locked layer.
- Sometimes the BEDIT toolbar does not get hidden after exiting block editor.
Service Pack 2
- AutoCAD may take a long time when inserting an external block that contains a large number of layer filters.
- Dynamic Blocks may not be updated when the Property Palette is visible.
- AutoCAD may become unstable after changing the view during ARRAYCLASSIC or Hatch preview.
CUI (Customizable User Interface)
Service Pack 2
- Context menus are different based on how you have loaded the Main and Enterprise menu.
Digitizer
Service Pack 1
- You may receive an error at the command line after enabling a WinTab driver and the tablet will not function.
Display Drivers
Service Pack 1
- Integrated chipsets are unable to return available video memory correctly.
DGN Support
Service Pack 2
- DGN linetypes may display inconsistently.
- Imported text of a dimension in a DGN file is not submitted to the dimension style.
Display Drivers
Service Pack 2
- When using COPYCLIP and PASTECLIP on a 64bit Operating System, you may see the object color change from the original color.
DRAW2D
Service Pack 2
- AutoCAD may become unstable when autosave runs with an attached PDF file that is an extremely small scale.
- AutoCAD may become unstable when using commands that modify one of the dimensions with the cyclic dependency.
DWF
Service Pack 1
- Arcs and circles viewed on edge appear as a single line. This changes 2D DWF/DWFx drivers to plot them as a single line, rather than a polyline.
DWG
Service Pack 1
- AutoCAD may become unstable when using the "UNDO" command on drawings that are 2 gigabyte or larger.
Dimensions
Service Pack 1
- Ordinate dimensions in paper space are not correctly reflecting the distance from paper space UCS.
ETRANSMIT
Service Pack 1
- AutoCAD may become unstable while closing a drawing after etransmitting it using the COM API.
Exchange
Service Pack 1
- Autodesk Exchange may display a non-subscription link after updating to a subscription serial number.
- User login IDs that contained special characters like “@” could not log in to online services.
Express Tools
Service Pack 1
- AutoCAD may become unstable when using the NCOPY command.
- Overkill may delete polylines incorrectly when working with reversed polylines.
- Overkill may not work well when there is an arc segment in between 2 line segments.
Export to Layout
Service Pack 2
- AutoCAD may become unstable when using the EXPORTLAYOUT command.
External Reference (XREF)
Service Pack 2
- DGN files become scaled by a factor of 1/12 after an xref bind.
Fields
Service Pack 2
- Field for viewport scale is displayed as "Custom" on opening legacy files such as AutoCAD 2009.
Hatch
Service Pack 1
- AutoCAD may become unstable when using the “separate hatch” option.
Image
Service Pack 1
- Multi frame QuickBird Tiff image files may not display expected colors.
- When trying to insert an Adobe Photoshop PSD file it was not visible in the file filter list.
- AutoCAD may become unstable when inserting an Adobe Photoshop PSD file.
Inquiry
Service Pack 2
- AutoCAD may become unstable when grip editing a PLINE with the Properties Palette open.
Layer
Service Pack 1
- Changing layer colors of layers beginning with non-alphanumeric characters may result in other layers changing colors.
- The layer state Ribbon control does not honor the apply properties viewport overrides.
Layouts
Service Pack 2
- Error message appears in command line after renaming the layout tab when sheet set manager is opened.
MLeader
Service Pack 1
- AutoCAD may become unstable when drawings with multileaders are saved to older versions.
Service Pack 2
- The landing on mleaders can change unexpectedly when certain LISP routines are run.
- AutoCAD may become unstable when using Check Standards on drawings with leaders.
Model Documentation
Service Pack 2
- Temporary IDW files with "dwg.tmp" extension are created when a file with model documentation drawing views from AutoCAD 2013 is opened in AutoCAD 2012.
- AutoCAD may become unstable after clicking the Publish button for drawings with AutoCAD 2013-created drawing views.
Modify
Service Pack 1
- AutoCAD may become unstable when editing polylines.
- NCOPY may fail to copy objects contained in blocks that were inserted into paper space.
Mtext
Service Pack 1
- Mtext Paragraph spacing value cannot be edited once a value is set.
- True Type (TTF) font text or mtext is blurry, bold, and distorted when the viewport is non-orthogonal because XY values are not exactly zero.
Service Pack 2
- AutoCAD LT may become unstable when setting the Mtext direction to vertical in the Property Palette.
OLE (Object Linking & Embedding)
Service Pack 1
- AutoCAD may become unstable when copying from an Excel file back to AutoCAD.
Service Pack 2
- AutoCAD may become unstable when using OLE to copy and paste Excel content.
Open/Save
Service Pack 1
- Cannot open drawing files from file Explorer if the drawing contains a "'%'" in the file name.
OSNAP
Service Pack 2
- The final value for the line is using the total length instead of stretch/extension.
- When using Osnap, then selecting a line with a grip, then stretching by entering an exact distance may not yield the expected length.
Other
Service Pack 1
- AutoCAD may stop responding when saving and or opening drawings with Symantec Norton 360 Version 5 installed on your system.
- You will be unable to open drawings created using a non-Autodesk product when using the Open() API.
- AutoCAD may become unstable when selecting the grid in some drawings.
AutoCAD may become unstable after editing MTEXT in a viewport and when exiting the program.
Service Pack 2
- AutoCAD may become unstable when opening drawings with possible corrupt array entities.
Parametric Drawing
Service Pack 1
- Area is wrong when coincident constraints are applied to entities.
PDF Export
Service Pack 1
- AutoCAD may become unstable when using PDF Export on files that contain MS Mincho font.
PDF Underlay
Service Pack 1
- AutoCAD may become unstable when unloading a PDF underlay.
- AutoCAD may become unstable when an undefined PDF underlay is unloaded.
- AutoCAD may become unstable when plotting drawings that include “MS Mincho” to PDF.
Performance
Service Pack 1
- Drawings containing many layers may become slower with each pan and zoom operation when the ribbon is active.
- Performance improvement in 64bit COM APIs.
Service Pack 2
- With DUCS turned on, the cursor may have been freezing after closing the block editor.
Plot
Service Pack 1
- You may experience data loss when sending multiple plots to Xerox printers.
- AutoCAD may become unstable when selecting plot preview.
Service Pack 2
- CTB, STB, PC3 and PMP files may not have been added to etransmit list when additional plot search paths were added.
Publish
Service Pack 2
- AutoCAD may become unstable when publishing to DWF.
Purge
Service Pack 1
- AutoCAD may become unstable when using the purge command.
Ribbon
Service Pack 1
- The linetype preview may be missing from the linetype dropdown in Ribbon Properties panel when opening drawings from the Application Menu.
- Ribbon Combo Box text eight may be empty when using "TEXTEDIT" on multiple dimensions.
Service Pack 2
- AutoCAD may become unstable when exiting Microsoft Windows 8.
Snaps
Service Pack 1
- With Snap enabled, the cursor does not move to snap intervals.
- Turning SNAPGRIDLEGACY ON will restore the old Snap behavior of the cursor when no command is active.
- Restores legacy SNAP behavior during certain LISP-based selection commands.
Selection
Service Pack 1
- Sheet List Table Context menu in Sheet Set Manager (SSM) is missing some menu items.
Service Pack 2
- AutoCAD may become unstable when copying large selection sets.
- AutoCAD may become unstable when working with joined splines.
Sheet Set Manager
Service Pack 1
- Sheet List Table Context menu in Sheet Set Manager (SSM) is missing some menu items.
Service Pack 2
- You may notice high network utilization with SMB V2 (Server Message Block) while working with the sheet set manger.
Startup
Service Pack 2
- AutoCAD may not start if the Operating System path is not able to be found.
Tables
Service Pack 1
- Cell style is grayed out when picking inside any cell.
- The data link menu is grayed out after inserting a data link in a table.
Service Pack 2
- When editing an Excel Data Links not all the information is displayed.
Tool tips
Service Pack 2
- Customized Tooltips fail to be aligned by rows.
UI Enhancements
Service Pack 1
- AutoCAD may become unstable attempting to edit a polyline vertices Pedit tangent.
- AutoCAD may become unstable in group selection where the group contains a box.
- When objects are on locked layers you are able to nudge them.
- AutoCAD may become unstable when interacting with the ViewCube while grip editing.
- When right click menus are disabled, selection or crossing right click actions are incorrect.
Visual Basic for Application (VBA)
Service Pack 1
- AcFocusCtrl cannot be inserted in a VBA form.
Service Pack 2
- On a 64bit Operating system with VBA loaded, you may not be able to restore AutoCAD after minimizing it.
Visual Lisp
Service Pack 1
Attribute dialog will be displayed when inserting a block with attributes based on the setvar ATTDIA value.
Visual Styles
Service Pack 1
- AutoCAD may become unstable when using osnap in a 2d hide view.
Service Pack 2
- Visual Styles may become lost when saving back to a previous drawing version such as AutoCAD 2007 file format.
External Reference
Service Pack 1
- AutoCAD may become unstable when interacting between the open dialog and the XREF manager.
Zoom/Pan
Service Pack 1
- AutoCAD may become unstable when zooming over the XY indicator in Layout.
The Service Pack brings back the Array dialog functionality by introducing a new ARRAYCLASSIC command. It also introduces the option to restore legacy Snap behavior by controlling it through the new SNAPGRIDLEGACY system variable:
ARRAYCLASSIC
Creates copies of objects in a regularly spaced rectangular or polar array.
SNAPGRIDLEGACY
1 – Always snap the cursor to the grid
0 – Only snap the cursor to the grid when AutoCAD prompts to specify a point
As you prepare to install this Service Pack, keep the following in mind:
Back Up Custom Files
It is recommended that you back up all custom CUIX, MNR, and MNL files before you apply this Service Pack.
Administrative Privileges
During installation, you will be prompted for the original installation media or a network image. In order to apply this Service Pack, you must have administrative privileges to install and uninstall products.
Network Deployment
Administrators can deploy this Service Pack over a network using the Deployment Wizard.
About Your Product
After you install the Service Pack , updated product information displays in the About dialog box.
Reboot
After you install, it is recommended to reboot your system even if not prompted.
The following Microsoft Windows command line switches are built into this Service Pack :
Instructions about how to use the /e command line switch are included in the installation procedures that follow.
Follow these instructions to install this Service Pack on a single computer.
You can use InfoCenter to apply this Service Pack through your local network. Detailed instructions on how to set up patching through your local network are listed in the InfoCenter tab of the CAD Manager Control Utility Help.
Note: You can install the CAD Manager Control Utility from the product installation media. Select Install Tools and Utilities and then select Autodesk CAD Manager Tools.
The following distribution method applies only to administrative images created with the Deployment Wizard. After you complete these procedures, subsequent deployments of your product will include this Service Pack.
In all cases, append this Service Pack to the deployment. The only time it is appropriate to merge the Service Pack is if you intend to distribute the deployment through a group policy object.
The patch (Service Pack ) file that you download contains an MSP (Microsoft Patch) file, which you extract from the executable file using the /e (extract) switch. For an example of the syntax, see step 2, below.
<local_drive:>\<patch_name> /e <local_drive:>\< patch_name>.msp
Windows XP
Windows Vista and Windows 7
Copyright ©2012 Autodesk, Inc.