Thank you for downloading AutoCAD® Plant 3D 2012 SP1 Isometric Pipe Supports Hotfix
This readme contains the latest information regarding the installation and use of this hotfix. You must install Service Pack 1 before you apply this hotfix.
It is strongly recommended that you read this entire document before you apply this hotfix to your product.Contents
· Issue Resolved by This Update
This hotfix applies to AutoCAD Plant 3D 2012 with SP1 applied.Isometric Pipe Supports
NOTE: You must have administrative privileges on your Microsoft Windows operating system to complete the installation process.
|
|
|
1.
|
On the computer where the affected product is installed, close all software applications. | |
2.
|
Download either "AutoCAD_Plant_3D_2012_SP1_ISO_PipeSupports_Hotfix_32bit.exe" or "AutoCAD_Plant_3D_2012_SP1_ISO_PipeSupports_Hotfix_64bit.exe". | |
3.
|
Run the .EXE to unzip the updated files. Modify the program files path if you installed to a location other than C:\Program Files\Autodesk\AutoCAD Plant 3D 2012. |
|
4.
|
Click Yes in the Confirm File Replace dialog for PnPIsoCore.dll. The new file version is 1.0.101.1. | |
5.
|
Start AutoCAD Plant 3D and create an Isometric drawing to verify that it is running. | |
Copyright ©2012 Autodesk, Inc.