Autodesk®
DL18480860 - Vault 2012 - Multi Issue Hotfix

In a continuing effort to provide high quality products, Autodesk has released this hotfix which provides the following updates;

- When performing a 'remove' Groups or Users operation in Configure Lifecycle Security a permission denied error is thrown (Error 303).
- A Property Compliance Equivalence Error could not be resolved.
- Preventing the loss of file dependencies as a result of a purge operation.
- A Copy Design update.

This README file highlights how to install this hotfix and other important information regarding this update.

CONTENTS

Description of the Issues
System Requirements
Related Hotfixes and Utilities
Known Issues
Warnings
Files Affected
Update Verification
Installation Instructions
Legal Notice

Description of the Issues

1. When multiple security settings are enabled on a folder, the settings would incorrectly prevent a user from performing a state change on a file.
2. Error handling for Property Compliance Equivalence has been improved to avoid some instances of noncompliance.
3. Performing a purge operation in some instances resulted in a loss of file dependencies.
4. When selecting a different copy design folder, the error “the given key was not present in the dictionary” was thrown and a user could not continue.

System Requirements

Vault Server

- Autodesk Data Management Server 2012 Update 1 (Vault)
- Autodesk Data Management Server 2012 Update 1 (Workgroup)
- Autodesk Data Management Server 2012 Update 1 (Collaboration)
- Autodesk Data Management Server 2012 Update 1 (Professional)

Related Hotfixes and Utilities

Known Issues

Warnings

It is strongly recommended to perform a back up prior to the application of this update.

This hotfix cannot be uninstalled. To revert to a pre hotfix state, the application must be reinstalled and a pre hotfix back up must be restored.

Files Affected

- Connectivity.Vault.dll
- Connectivity.Application.VaultManager.dll​
- Connectivity.Platform.dll

Update Verification

- The updated Connectivity.Vault.dll and Connectivity.Application.VaultManager.dll​ files are version 16.1.58.130.
- The updated Connectivity.Platform.dll file is version 16.1.58.120.

Installation Instructions

WARNING: Failure to follow these instructions properly may result in unusable sites.

NOTE: Always ensure that a successful backup has been performed before applying any hotfixes.

SINGLE SITE

Hotfix Installation

1. Reset the web service on the Autodesk Data Management Server (ADMS) by typing 'iisreset' at a command prompt.
2. Run DL18480860.msp on the server to install the hotfix.
3. Open the ADMS Console and migrate all unmigrated databases and libraries before proceeding.

1. NOTE: It may be necessary to detach an unmigrated database if the update addresses a migration problem.

4. Close the ADMS Console application.

Database Update

5. Open a command prompt and navigate to the installed location of Connectivity.ADMSConsole.exe.
6. Run ADMS b2bmigrate operation in command line mode:

1. Example: Connectivity.ADMSConsole.Exe -Ob2bmigrate -VUadministrator -VPadmin_password -DBUsql_user -DBPsql_password
2. NOTE: Replace 'admin_password' with the appropriate administrator password for the -VP switch.
3. The last two command line parameters are required only if the 'sa' password is not the default password.

7. A 'migration successful' dialog will display when the b2bmigrate operation has completed.
8. If necessary, open ADMS Console and attach any previously detached databases.

Rebuild Search Indexes – applied on every Autodesk Data Management Server (ADMS).

9. Open the Autodesk Data Management Server console and begin a Rebuild Search Indexes.

MULTI SITE (file replication)

Hotfix Installation – applied to every Autodesk Data Management Server (ADMS).

1. Reset the web service by typing 'iisreset' at a server command prompt.
2. Run DL18480860.msp on an ADMS server to install the hotfix.
3. Repeat the preceding steps for every ADMS server.
4. Open one ADMS Console and migrate all unmigrated databases and libraries before proceeding.

1. NOTE: It may be necessary to detach an unmigrated database if the update addresses a migration problem.

5. Close the ADMS Console application.

Database Update – applied ONCE from ONE Autodesk Data Management Server (ADMS).

6. WARNING: DO NOT PROCEED until the hotfix has been successfully applied on ALL ADMS servers.
7. Open a command prompt and navigate to the installed location of Connectivity.ADMSConsole.exe.
8. Run ADMS b2bmigrate operation in command line mode:

1. Example: Connectivity.ADMSConsole.Exe -Ob2bmigrate -VUadministrator -VPadmin_password -DBUsql_user -DBPsql_password
2. NOTE: Replace 'admin_password' with the appropriate administrator password for the -VP switch.
3. The last two command line parameters are required only if the 'sa' password is not the default password.

9. A 'migration successful' dialog will display when the b2bmigrate operation has completed.
10. If necessary, open ADMS Console and attach any previously detached databases.

Rebuild Search Indexes – applied on every Autodesk Data Management Server (ADMS).

11. Open the Autodesk Data Management Server console and begin a Rebuild Search Indexes.

CONNECTED WORKGROUP (file and SQL replication)

Hotfix Installation – applied to every Autodesk Data Management Server (ADMS) in all workgroups.

1. Reset the web service by typing 'iisreset' at a server command prompt.
2. Run DL18480860.msp on an ADMS server to install the hotfix.
3. Repeat the preceding steps for every ADMS server in all workgroups.
4. Open one ADMS Console on the Publisher workgroup and migrate all unmigrated databases and libraries before proceeding.

1. NOTE: It may be necessary to detach an unmigrated database if the update addresses a migration problem.

5. Close the ADMS Console application.

Database Update – applied ONCE from one Autodesk Data Management Server (ADMS) on the Publisher workgroup ONLY.

6. WARNING: DO NOT PROCEED until the hotfix has been successfully applied on ALL ADMS servers in all workgroups.
7. Ensure that all workgroups are online and accessible before proceeding. Do not proceed until the Replication Status | Merge Information dialog
   shows "Waiting 60 second(s) before polling for further changes." for each replicated vault and library.
8. Open a command prompt and navigate to the installed location of Connectivity.ADMSConsole.exe.
9. Run ADMS b2bmigrate operation in command line mode:

1. Example: Connectivity.ADMSConsole.Exe -Ob2bmigrate -VUadministrator -VPadmin_password -DBUsql_user -DBPsql_password
2. NOTE: Replace 'admin_password' with the appropriate administrator password for the -VP switch.
3. The last two command line parameters are required only if the 'sa' password is not the default password.

10. A 'migration successful' dialog will display when the b2bmigrate operation has completed.

1. NOTE: A successful migration may take some time as the database updates must be consumed by the subscriber workgroups.

11. If necessary, open ADMS Console and attach any previously detached databases.

Rebuild Search Indexes – applied on every Autodesk Data Management Server (ADMS).

12. Open the Autodesk Data Management Server console and begin a Rebuild Search Indexes.

Legal Notice

Autodesk does not guarantee that you will be able to successfully download or implement any hotfix, utility, service pack or
workaround, or any of the tips, tricks, examples or suggestions outlined in any Autodesk product support technical documents.
Technical documents, hotfixes, utilities, service packs and workarounds are subject to change without notice to you. Autodesk
provides technical documents, hotfixes, utilities, service packs and workarounds "as is" without warranty of any kind, whether
express or implied, including warranties of merchantability and fitness for a particular purpose. In no event shall Autodesk or
its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of data, or loss
of business profits or special damages, that may occur as a result of implementing any hotfix, utility, service pack or workaround,
or any suggestion outlined in any Autodesk product support technical document, even if Autodesk or its suppliers have been advised
of the possibility of such damages.

Copyright © 2012 Autodesk, Inc.