Auto Stabilize Menu Settings

Analysis Settings

Analyze button

Click to run the stabilization analysis. During analysis, the viewport defaults to the Front view, and the frame advances as the stabilization is calculated. Progress can be monitored by the keyframes that have been created during analysis and the percentage of completion displayed next to the Analyze button. Track points are displayed on the clip to indicate how the stabilization was tracked.

Progress field

Displays the percentage of the analysis that is complete. Non-editable.

Scene Flexibility field

Displays the level of focus on rigid objects that move in the clip. Enter 0% to focus on a single rigid object as it moves or 100% to analyse all visible motion paths. If the analysis has no scene flexibility, the stabilization will focus on a single rigid object as it moves in the clip. Use the following values as a general guideline:

Select:	To:
0%-20%	Stabilize a pan, tilt, zoom, or the motion of a single rigid object that is visible during the entire analysis.
30%-70%	Stabilize objects that change their shape or depth, and exclude objects that are smaller or moving rapidly.
80%-100%	Stabilize all visible movements.

Use Matte button

Enable to exclude black areas on the matte from analysis on the front clip, and constrain the Analysis region.

Range From field

Displays the value of the first frame to include in the analysis. Editable.

Range To field

Displays the value of the last frame to include in the analysis. Editable.

Stabilization Method box

Select whether to perform a two-dimensional or perspective analysis.

Negate Stabilization button

Enable to apply the inverted parameter values.

Region of Interest button

Enable to display a rectangle that can be resized to indicate the region you want to analyse on the front clip. Select Front from the View box.

Auto button

Enable to automatically track motion within the region of interest. At each frame, the position of the region of interest is updated based on the motion within the area. If this button is disabled, and the region of interest was not previously tracked, the region of interest remains static.

Crop Box Border colour pot

Displays the current colour of the crop box border. Editable.

X Position field

Displays the horizontal position from the centre of the crop box relative to the centre of the source frame, in pixels. Editable.

Y Position field

Displays the vertical position from the centre of the crop box relative to the centre of the source frame, in pixels. Editable.

X Scale field

Displays the horizontal scale of the crop box relative to the crop box width value, as a percentage. Editable.

Y Scale field

Displays the vertical scale of the crop box relative to the crop box height value, as a percentage. Editable.

Stabilizaton Settings

Effect field

Displays the percentage of smoothness used in the final stabilization output and determines how smooth the stabilization curves are. Editable.

Smoothness field

Displays the level of smoothness of the stabilization curves generated by the analysis and determines the mix between the original motion and the completely stabilized transformation. Editable.

All Parameters button

Click to include all parameters in the stabilization. Click again to turn off all parameters.

Position X button

Enable to include the X-axis position in the stabilization.

Position Y button

Enable to include the Y-axis position in the stabilization.

Rotation button

Enable to include the rotation in the stabilization.

Scaling button

Enable to include scaling in the stabilization.

Perspective button

Enable to include perspective in the stabilization.

Lock All button

Click to link the parameter values at the reference frame to all frames in the analysis.

Position X Lock button

Enable to link the X-axis position at the reference frame to all frames in the analysis.

Position Y Lock button

Enable to link the Y-axis position at the reference frame to all frames in the analysis.

Rotation Lock button

Enable to link the rotation at the reference frame to all frames in the analysis.

Scaling Lock button

Enable to link scaling at the reference frame to all frames in the analysis.

Perspective Lock button

Enable to link the perspective at the reference frame to all frames in the analysis.

Reference and Tracker Settings

Set Frame button

Click to set the current frame as the reference frame for the stabilization.

Reference Frame field

Displays the current reference frame. Non-editable.

Display Size field

Displays the pixel width and height of track points. Editable.

Show Cloud button

Enable to display the track point cloud.

Delete and Update button

Click to delete selected track points and update stabilization curves. Selected points are displayed in red in the image.

Offset Settings

Position X field

Displays the X-axis offset applied to the clip. Editable.

Position Y field

Displays the Y-axis offset applied to the clip. Editable.

Rotation field

Displays the rotation offset applied to the clip. Editable.

Scaling field

Displays the scaling offsets applied to the clip. Editable.

Project X field

Displays the X-axis projection offsets applied to the clip. Editable.

Project Y field

Displays the Y-axis projection offsets applied to the clip. Editable.

Anamorphic field

Displays the anamorphic offsets applied to the clip. Editable.

Shear field

Displays the shearing offsets applied to the clip. Editable.

Rendering Settings

Repeat Mode box

Select an option to fill the empty portions of the frame.

Resize Fit Mode box

Select whether to resize the clip with width and height values.

Same as Input	The output resolution remains the same as the input resolution.
Custom	You define the output resolution.

Width field

Displays the width of the image. Editable.

Height field

Displays the height of the image. Editable.

Hardware Filtering button

Enable to filter subpixel information.

Anti-Aliasing button

Enable to activate sampling and softness.

Sampling box

Select the number of samples to use in the anti-aliasing process.

Softness field

Displays the level of softness of the samples. Editable.