General Settings
- Rendering box
-
Select whether to render in Progressive or Interlaced mode.
- Regen button
-
Enable to get dynamic updating of the image as you make changes.
Edges Settings
- Edges button
-
Enable to create an image composed of the edges in an image.
- Matte Edge Mode box
-
Select whether to use the Basic, Advanced or Smooth edge-detection algorithm. Certain settings change based on this selection.
Basic Settings
- Width field
-
Displays the value that affects how the edge-detection algorithm determines whether each pixel forms part of the edge. Editable.
- Minimum Input field
-
Displays the lower limit of the luminance values. Pixels with lower values are mapped to black. Editable.
- Maximum Input field
-
Displays the upper limit of the luminance values. Pixels with higher values are mapped to white. Editable.
Advanced Settings
- Minimum Input field
-
Displays the lower limit of the luminance values. Pixels with lower values are mapped to black. Editable.
- Maximum Input field
-
Displays the upper limit of the luminance values. Pixels with higher values are mapped to white. Editable.
- Inner Width field
-
Displays the width of the inner edges of the matte. Editable.
- Outer Width field
-
Displays the width of the outer edges of the matte. Editable.
- Width Proportional button
-
Enable to affect the inner and outer width proportionally.
- Inner Softness field
-
Displays the level of softness on the inner edges of the matte. Editable.
- Outer Softness field
-
Displays the level of softness on the outer edges of the matte. Editable.
- Softness Proportional button
-
Enable to affect the inner and outer softness proportionally.
Smooth Settings
- Smooth Minimum field
-
Enter a lower limit for the edge detection. Editable.
- Smooth Maximum field
-
Enter the upper limit for the edge detection. Editable.
- Smooth Softness field
-
Enter a value for softness of the edge. Editable.
- Smooth Gain field
-
Enter a value for the softness gain of the edge. Editable.
Shrink Settings
- Shrink button
-
Enable to remove pixels from the edge of the matte.
- Shrink Mode box
-
Select whether to use shrink in a single pass or iterative mode. Single Pass mode allows you to control edge softness.
- Shrink Width field
-
Displays the width of the border that is removed from the edge of the matte. Editable.
- Softness field
-
Displays the amount of softness applied to the edges of the matte.
- Minimum Input field
-
Displays the lower limit of the luminance values. Pixels with lower values are mapped to black. Editable.
- Maximum Input field
-
Displays the upper limit of the luminance values. Pixels with higher values are mapped to white. Editable.
Erode Settings
- Erode button
-
Enable to blend the light and dark edges of the matte.
- Erode Width field
-
Displays the width of the matte border to soften. Editable.
Blur Settings
- Blur button
-
Enable to apply a softening Gaussian blur filter to the edge of the matte.
- Blur Width field
-
Displays the width of the blur applied to the edge of the matte. Editable.
- Blur Height field
-
Displays the height of the blur applied to the edge of the matte. Editable.
- Proportional button
-
Enable to constrain blur amount proportions.
Matte Luminance Curve Settings
- Matte Luminance Curve
-
Controls the blending of the edges.
You can add keyframes to the curve using Add mode, move keyframes with Move mode, and modify the curve's shape using tangent
handles.
- Reset button
-
- Home button
-
Reverts to the original view.
Noise Settings
- Noise button
-
Enable to add noise to the transparent areas of the matte.
- Noise Mode box
-
Select the mode of noise to apply throughout the length of the image.
Static adds noise as a still frame; Impulse adds noise that changes at each frame.
| Select: |
To add noise: |
| Static |
As a still frame. You can move the static noise using the Position X and Y fields. |
| Impulse |
Changing at each frame, but always starting from the same seed. |
- Weight field
-
Displays the level of noise in the clip.
Values below 1 add more white noise, and values above 1 add black noise. Editable.
- Softness field
-
Displays the level of Gaussian softness added to the noise. Editable.
- Position X field
-
Displays the X position of the noise when using Static mode. Editable.
- Position Y field
-
Displays the Y position of the noise when using Static mode. Editable.
- Size X field
-
Displays the size of the noise along the X axis. Editable.
- Size Y field
-
Displays the size of the noise along the Y axis. Editable.
- Proportional button
-
Enable to affect the X and Y sizes proportionally.
