Accessing the Distort Menu
- Input1 Display box
-
Select a display mode for Input1.
- Input2 Display box
-
Select a display mode for Input2.
- Matte1 Display box
-
Select a display mode for Matte1.
- Matte2 Display box
-
Select a display mode for Matte2.
- Back Display box
-
Select a display mode for the background clip.
- Input box
-
Toggles between Input1 and Input2 clips based on the selection in the View box.
If Input is selected in the View box, this box toggles between Front1 and Front2. If Matte is selected in the View box, this
box toggles between Matte1 and Matte2. If Result is selected in the View box, this box toggles between showing the splines
for Front1 and Front2 drawn on top of the result.
- X Position field
-
Displays the position of the X axis. Editable.
- Y Position field
-
Displays the position of the Y axis. Editable.
- Z Position field
-
Displays the position of the Z axis. Editable.
- Motion Path button
-
Enable to animate the position of the axis using a spline drawn in the scene.
- X Rotation field
-
Displays the rotation value of the X axis. Editable.
- Y Rotation field
-
Displays the rotation value of the Y axis. Editable.
- Z Rotation field
-
Displays the rotation value of the Z axis.
- X Scale field
-
Displays the scale value of the X axis. Editable.
- Y Scale field
-
Displays the scale value of the Y axis. Editable.
- Z Scale field
-
Displays the scale value of the Z axis. Editable.
- Prop Scale button
-
Enable to scale the X, Y, and Z axes proportionally.
- X Shear field
-
Displays the shear value of the X axis. Editable.
- Y Shear field
-
Displays the shear value of the Y axis. Editable.
- Z Shear field
-
Displays the shear value of the Z axis. Editable.
- X Centre field
-
Displays the centre value of the X axis. Editable.
- Y Centre field
-
Displays the centre value of the Y axis. Editable.
- Z Centre field
-
Displays the centre value of the Z axis. Editable.
- Track Axis button
-
Opens the Stabilizer menu to apply tracking data to an axis.
- Tracking Rotation box
-
Select whether tracking rotation is On, Off, or Inverted.
- Tracking Scale box
-
Select whether tracking scaling is On, Off, or Inverted.
- Tracking Adjust box
-
Select whether an offset is applied relative to the spline's axis.
- Track Clip box
-
Select the clip to track.
- Warper button
-
Select whether to display the Warp or Morph menu.
- Interpolation field
-
Displays the percentage of mixing between the Input1 spline and the Input2 spline when source splines are linked for source
interpolation. Editable.
You independently set an interpolation value for each set of linked Front1 and Front2 source splines.
- Blend field
-
Displays the level of blend between the Input1 and Input2 clips when morphing. Editable.
NoteThe Blend field is only available from the Morph menu.
- Source button
-
Enable to display source splines for manipulation. Also use to display the unwarped input clip.
- Source Show button
-
Enable to display source splines for reference when working with destination splines.
- Source colour pot
-
Displays the colour of all source splines. Editable.
- Destination button
-
Enable to display destination splines for manipulation. Also use to display the warped input clip.
- Destination Show button
-
Enable to display destination splines for reference when working with source splines.
- Destination colour pot
-
Displays the colour of all destination splines. Editable.
- Correspondences button
-
Enable to display correspondence points and connector lines, which indicate how the source spline maps to the destination
spline.
You can add, edit, animate, and delete correspondence points. The more correspondence points a spline has, the greater effect
it has on the overall warp.
- Active button
-
Enable to allow greater control over an animated spline by toggling selected vertices on and off.
- Lasso Fit field
-
Displays the number of vertices in freehand segments of a spline. Editable.
Increasing the value decreases the number of vertices, while decreasing the value increases the number of vertices. Only
segments of the spline drawn using freehand mode are affected, while segments created by simple clicks remain unaffected.
The Lasso Fit parameter loses its influence over freehand segments of a spline if you edit vertices.
- Link box
-
Controls whether source and destination splines are linked together or manipulated independently.
Set this to Lnk Src & Dst to keep the source and destination splines linked as you draw and animate the source spline. Set
this to Enable Warping to control the destination spline independently to create a warp. You can also independently link and
unlink the axis nodes that are the parents of a source spline and its corresponding destination spline.
- Toggle Input button
-
Switch between an Input1 spline and an Input2 spline.
This is useful when you have animated a spline on one input and wish to apply it to the other.
- Iterations field
-
Displays a value for the distance that the distortion follows the destination spline. Editable.
If Z-mode is disabled, the maximum distance of the distortion is limited to avoid overlapping. When there is a large distance
between a source and destination spline, you will achieve better results by increasing the number of iterations. For smaller
warps or morphs, there is no advantage in using a greater number of iterations—it will increase processing time unnecessarily.
- Z-mode button
-
Enable to allow overlapping in the image to create 3D-like effects where parts of the image are pulled over other parts.
NoteWhen Z-mode is enabled, the Iterations field is disabled.
- Range field
-
Displays the size of the region affected by the warping effect. Editable.
The greater the value, the larger the portion of the image affected. A value of 100% affects the entire image, a value of
33% affects one-third of the image, for example.
- Weight field
-
Displays the relative weight on the selected spline, to control its influence. Editable.
For example, you can set a higher weight on a spline in an area of the image that you do not want to move.
- Resolution field
-
Displays the pixel resolution of the clip being warped or morphed. A lower pixel resolution creates warps and morphs that
better follow the contours of the distortion splines, although it can slow down system performance.
- Track Shape button
-
Opens the Stabilizer menu to apply tracking data to a spline's vertices.
- Adjust box
-
Select whether an offset is applied relative to the spline's tangents.
