May 11, 2012

Release Notes - Read Me file
Autodesk, Inc.

In a continuing effort to provide high quality products, this Service Pack 2 for Autodesk Inventor 2012 fixes or addresses a variety of issues. This file highlights how to install the service pack and what has been fixed.

Contents




Notes About Installation

Installation Requirements

Installation Instructions

Download Location

Summary of Issues Addressed by this Service Pack

Autodesk Inventor Professional 2012

Tube & Pipe

Cable & Harness

Stress Analysis

Dynamic Simulation

Frame Analysis

Tooling

Autodesk Inventor 2012

AEC Exchange

API

Assembly Modeling

Content Center

Direct Manipulation

Drawing Manager

Enhanced Visualization

ESKD

Eco Materials Adviser

Framework

Frame Generator

iLogic

Part Modeling

Presentation

Repair Environment

Sketch

Studio

Translators

Vault

Legal Notice

Return to Top

• The installation of Autodesk Inventor 2012 Service Pack 1 is no longer a prerequisite for the installation of Service Pack 2. However, Service Pack 2 still installs if Service Pack 1 is present. Service Pack 2 includes all fixes included in Service Pack 1. To update from Autodesk Inventor 2012 and obtain the latest updates for your installation, you can install only Service Pack 2, and skip Service Pack 1.
• For deployed installations, Append the Service Pack to your existing deployment image rather than Merge it. This is the suggested behavior for all service pack releases. Additionally, update a deployment image on the same bit-type machine as the target machine for the final installation from that image. For more information about Network Deployments, on your original installation media, in the installer, select Read The Documentation, and see the Network Administrator’s Guide.
• Install only the bit-type version of Autodesk Inventor 2012 Service Pack 2 that corresponds to the bit-type version of your installation of Autodesk Inventor 2012.
• Keep the original installation media or network image readily accessible. During installation/uninstallation, it is sometimes necessary to access the original installation media or network image.
• There are no Vault Client Updates associated with this Service Pack 2 release.
• The Autodesk Inventor Optimization update is included in Autodesk Inventor 2012 Service Pack 2. However, after this service pack is installed, this online service is available within Inventor only if that installation originated from a Product Design Suite - Ultimate 2012 or Product Design Suite - Premium 2012 media installation.

Return to Top

• Verify you have administrator privileges on your local machine to install Autodesk Inventor 2012 Service Pack 2.
• The 32-bit version of Autodesk Inventor 2012 Service Pack 2 is approximately 62 MB in size. A minimum of 1236 MB of free disk space is required on the drive where your temporary files are directed.
• The 64-bit version of Autodesk Inventor 2012 Service Pack 2 is approximately 121 MB in size. A minimum of 2015 MB of free disk space is required on the drive where your temporary files are directed.

Return to Top

Installation

1. Update your operating system before installing Autodesk Inventor 2012 Service Pack 2. Reboot your system after the updates are installed.
2. If Autodesk Inventor 2012 Service Pack 1 is installed, you can leave it in place, as Service Pack 2 installs on top of it. However, uninstall any previous Beta versions of Autodesk Inventor 2012 Service Pack 1, if installed and still present, by following the uninstall instructions supplied with that Beta.
3. Download the appropriate version of Autodesk Inventor 2012 Service Pack 2; either the 32-bit or 64-bit version depending upon your operating system bit type.
4. Double click the .msp file to update Autodesk Inventor 2012 with Service Pack 2. A progress bar displays while the installer updates the files on your system. When done, click Finish.
5. If required, reboot the system after installation of the Service Pack 2 is finished.

To verify the success of the installation, start Autodesk Inventor. On the Info Center Help pull-down, select About Autodesk Inventor. If the About box displays: Build: 219, Release: 2012 SP2, the installation was successful.

Return to Top

Uninstallation

Before uninstalling Autodesk Inventor 2012 Service Pack 2, please verify that you have the Microsoft fix for The Removal of an Update, KB2663352, as this will avoid excessive uninstall times on Windows 7 and Windows Server 2008 R2 systems. For more information and access to this Microsoft download, refer to this Autodesk Support Blog article.

In certain situations, the uninstallation of Autodesk Inventor 2012 Service Pack 2 has a dependency on the original installation media. We recommend that before you start this uninstall, ensure the original installation media is available.

Remove Autodesk Inventor 2012 Service Pack 2 through the typical operating system uninstall capability.

Uninstalling Autodesk Inventor 2012 Service Pack 2 returns installations to the state they were in prior to its installation, including all installed Hotfixes.

Return to Top

Locate Autodesk Inventor 2012 Service Pack 2 here: Inventor Updates

Return to Top

Abbreviations used:


• CER refers to a Customer Error Report.
• NG refers to an item reported on the Autodesk Newsgroups.

Return to Top

Tube & Pipe




Service Pack 1:

• CER: A crash occurs when you make a Tube & Pipe Run assembly adaptive on 64-bit systems.
• A crash occurs in the Tube & Pipe environment when you reset the ribbon.
• The BOM structure attribute “Phantom” does not persistently save to a Tube & Pipe Run assembly.



Service Pack 2:

None...

Return to Top

Cable & Harness




Service Pack 1:

• When there are many segments in one Harness, automatic route performance slows.



Service Pack 2:

None...

Return to Top

Stress Analysis




Service Pack 1:

• A crash occurs after you change parameters in a certain order in the Animate dialog box.
• Graphics become inconsistent after using Animate, then Convergence.
• The Guide search function fails in the Simplified Chinese version of Inventor.
• Legacy result files and folders are not purged from disk after re-solving and saving.
• Legacy loads from 2009 or earlier releases are not recognized if results are not present.
• Meshing fails for a circular fillet weld.
• Cannot create a probe in specific areas in certain simulations.
• The warning message "...different number of bodies than base configuration." displays when solving a parametric component instance pattern with a decreasing number of instances.



Service Pack 2:

• Geometry for simulation can sometimes become distorted after excluding patterns or assembly features.
• FEAComputeServer.exe has stopped working message occurs rarely on certain models and simulations.
• Promote configuration or material to model does not automatically trigger updates.
• NG: Load is sometimes ignored when applied to very small faces compared to the overall size of the part (small face is ignored in the mesh).
• NG: HTML report generation fails if logo image source location is the same as the report target location.
• NG: During batch solving, the Cancel button prematurely changes to Close after the first simulation is completed.

Return to Top

Dynamic Simulation




Service Pack 1:

• The Browser pane is blank after undo then redo of entering this environment.
• In Windows 7, a crash occurs when you edit a load location To or From a grounded component.



Service Pack 2:

• CER: A crash occurs when you enable automatic conversion of assembly constraints to joints in particular models.
• CER: A crash occurs if you re-enter the environment after assembly modification on XP-32 systems.
• CER: A crash occurs while you edit 3D Contact joint properties under certain conditions.
• Encountered an improper argument message displays after you accept the joint properties dialog box the first or second time after creating a motion load analysis.
• CER: Inventor becomes unresponsive or crashes if you click mechanism status on some over-constrained simulations (after converting constraints and welding mobile parts).

Return to Top

Frame Analysis




Service Pack 1:

• Custom Constraint does not allow a degree of freedom with stiffness unless another degree of freedom is fixed.
• After you generate a report with images, memory is not released.
• Unable to edit Gravity magnitude.



Service Pack 2:

• Rotation for custom constraint displays only fixed type in report.
• NG: HTML report generation fails if logo image source location is the same as the report target location.

Return to Top

Tooling




Service Pack 1:

• Inventor crashes when you change the ejector type from anti-rotation, using the check box to turn On to Off.
• Nothing displays in the graphics area after you create a 2D drawing for a mold assembly on a localized build.
• Runner Balance Analysis does not work if you install only Autodesk Moldflow Adviser 2012.



Service Pack 2:

• Mold design assembly migration fails with Task Scheduler.

Return to Top

AEC Exchange




Service Pack 2:

• CER: Inventor crashes when you enter BIM Exchange with a file missing from an assembly.

Return to Top

API




Service Pack 1:

• Cannot create a radius dimension on circular drawing curves projected from spline edges.
• Document.SaveAs does not return an error when the file folder specified to save to is write-protected.
• Selecting a curve segment from a Drawing Curve results in selection of the wrong segment if the segment originates from a silhouette edge.
• SurfaceEvaluator.GetParamAtPoint does not work correctly with .Net programs when the GuessParams argument is not initialized with valid values. An uninitialized array usually indicates that there are no guess parameters.
• OnFileResolution events incorrectly honor the reference relation for iPart/iAssembly factory files.
• You cannot change specific file metadata related to file paths, which creates problems with the Make Part and Make Component commands.
• The OnPopulateFileMetadata event does not work correctly for the Make Part, Make Component or Copy Components commands.
• SketchedSymbols.Add always inserts a symbol in activeSheet.
• Unable to set the value of a parameter when placing an iFeature through the API.
• CustomParameterGroup.Delete does not delete Boolean and text parameters.
• When closing 64-bit Inventor, you are not prompted to save any VBA projects that are edited.



Service Pack 2:

• Export DWF with DataIO.WriteDataToFile in ApprenticeServer raises "whiptk_wt_ns.7.12.601.dll can't be loaded" error.
• Get DrawingCurves based on an iFeature raises an error.
• Place Balloon object wrongly honors the 15-degrees-snapping rule.
• GeneralDimensions.AddLinear does not work when passing intent created on 3D sketch geometry.
• DrawingCurve that is from thread feature does not return start/end/mid points.
• OnOpenDocument returns the wrong top level document when it opens a document by its referencing drawing document.
• AssemblyConstraint.EntityTwo returns a proxy object incorrectly when the sub-assembly is being in-place edited.
• Access WorkSurface properties returns an error for some model data.
• Change ActiveTableRow for iFeatureTable does not work when it has custom values.

Return to Top

Assembly Modeling




Service Pack 1:

• Visibility of elements in an assembly pattern is not turned on if the pattern is invisible.
• Edit of the extrude feature to 'Between' faces fails.
• iCopy components are not in the expected position after editing iCopy.
• iCopy uses the wrong components to construct the assembly patterns.
• In an iAssembly with a pattern of pattern elements, BOM QTY for all members is equal to the active member.
• A crash occurs after you edit a Mirror Fillet feature and then recreate the Mirror feature.
• CER: A crash occurs when you open an assembly with an unresolved component.
• NG: In an assembly pattern, when the total count of the component occurrences becomes too large, the performance is very slow.
• When Format is set as Fractional in the Custom Property Format dialog box, the wrong drop-down list displays.
• It is necessary to turn off the visibility twice before it works.



Service Pack 2:

• The color of occurrence is wrong when you change the Design View.
• Inventor crashes when you change the LOD in a sub-assembly.
• Inventor crashes when you replace the component.
• Inventor crashes when you press the Enter key while you hold down the left mouse button after you enter an offset value for an offset workplane.
• Inventor crashes when you input the Count of a pattern with another document active.
• A crash occurs when you update a parameter of a component that is linked to the assembly.
• CER: Inventor crashes when you save a particular assembly.
• CER: Inventor crashes when switch from Face Fillet to Edge Fillet on fillet dialog when retry a face fillet.
• Inventor crashes when you create a constraint for two components.

Return to Top

Content Center




Service Pack 1:

• A crash occurs when you set the "Content Center Files" folder to a shared read only folder.



Service Pack 2:

• Refreshing a Tube & Pipe part fails when a Tube & Pipe Addin is not loaded.
• CER: A crash occurs when you insert certain Content Center files.

Return to Top

Direct Manipulation




Service Pack 1:

• In the More tab within the Extrude dialog box, when you specify the taper angle with the Asymmetric option, the Shape tab opens.
• CER: A crash occurs in the Assemble command while using a 3D Connexion space mouse.
• The Hole command keeps the Through All termination type as the default in the Inventor session.
• CER: Inventor crashes after you click a manipulator when the Face view activates.
• When the default chamfer type is Two Distance and you select an edge and then invoke chamfer, the selection disappears.
• After you apply a fillet, the extended section of the fillet type in the dialog box does not persist.
• When using Select Other with a mouse scroll wheel, some of the selection choices are skipped.
• The mini-toolbar disappears after you create a new in-place part.



Service Pack 2:

• Fixed sync update for retrieve dimension.

Return to Top

Drawing Manager




Service Pack 1:

• A bitmap is not visible in the title block if it is not pre-existent in the drawing.
• Center marks dimension incorrectly to the ends of a slot or the end of a shaft.
• The tolerance on a retrieved dimension does not update on section views.
• CER: A crash occurs during View Update in Memory Save mode.
• Inventor crashes when you close it directly with drawing files open.
• NG: A drawing symbol highlights in the Symbols Ribbon panel, even when not active.



Service Pack 2:

• Fixed sync update for retrieve dimension.
• Inventor crashes when you select an .idw file, and click Print on the context menu.
• CER: A crash occurs when you define a new base point on the DWG file.
• Measure Distance tool in Drawing Manager does not correctly measure the diameter.
• CER: A crash occurs when you right click on the document name.
• Design Views are not honored after you apply Service Pack 1 with Cable & Harness information.
• A Bug Alert displays when you delete a raster view.
• NG: Drawing View placement is inconsistent when you check "Create projected views immediately after base view creation".

Return to Top

Enhanced Visualization




Service Pack 1:

• CER: Inventor crashes when you create drawing views.
• CER: Inventor crashes when you edit a sketch after several undo and redo commands.
• CER: Inventor crashes if D3DX9.dll or D3D10_42.dll is missing.
• Inventor crashes when you create a new file if the Inventor installation path contains Chinese or Japanese characters.
• Inventor sometimes crashes when you open a file twice with all shadows and image-based lighting turned on simultaneously.
• The view changes when you zoom or rotate the model under ray tracing.
• The transparency of ClientGraphics is incorrect after calling GraphicsNode.RenderStyle.
• CER: Inventor crashes if you zoom a model in the Shaded with Hidden Edges visual style.
• CER: Inventor crashes when you project hidden edges.
• CER: Inventor crashes when you close it directly with some drawing files open.
• CER: Inventor crashes when you open Application Options with Quality or Performance set in the Hardware settings.
• Assembly models have transparency problems if you assign native mesh materials to some parts.



Service Pack 2:

• Unable to record a drive constraint into an avi file.
• CER: With all addins unloaded, Inventor sometimes crashes when you use New or Open a document, and then exit it directly.
• Sketch Degrees of Freedom symbols do not show in a face.
• CER: Inventor crashes when you enable Software Graphics under the Performance or Quality settings on an XP operating system.
• CER: Runtime error R6025-pure virtual function call generates, and Inventor crashes when you resize the window and zoom during an in place edit, and Shaded with Hidden Edges.

Return to Top

ESKD




Service Pack 1:

• The ESKD parts list does not recognize virtual components.



Service Pack 2:

None...

Return to Top

Eco Materials Adviser




Service Pack 1:

• Inventor crashes when you invoke the Eco Materials Adviser on the Windows XP 64-bit operating system. To address this issue, you can download the new version from the Autodesk Eco Materials Adviser web site.



Service Pack 2:

None...

Return to Top

Framework




Service Pack 1:

• A crash occurs when executing the Edit View command from the marking menu to a selected drawing view in an AutoCAD DWG file.
• A crash occurs when opening a part file with over 2000 iFeature files in the iFeature Catalog.
• On the ribbon, Symbols panel, a drawing symbol highlights when it is not active.
• After a deployment installation, only the user who installed the program has access to customized preferences.
• CER: A crash occurs when you quickly activate the Open Document list two or more times from the Document tabs.
• Checkmarks are missing for dimension options when they are turned on in the marking menu.
• iFeature commands do not persist in the User Commands panel when they are added with other Ribbon commands.
• In the Presentation environment, in the marking menu, a component marked invisible does not become visible when you turn on the Visibility option.
• The marking menu is not customizable in a new modeling environment by the Inventor API.
• Non-localized strings display in the Autodesk Material Library dialog box.
• Route and Hose marking menu are missing in the Tube & Pipe modeling environment.
• Shortcut keys Ctrl+X/C/V do not work in the InfoCenter search box.
• Shortcut keys for iFeature and Macro commands do not persist when restarting Inventor.
• In the Factory add-in, after you disable the "Load Automatically" option in the Add-In Manager dialog box, Layout/Simulation still loads on Inventor startup.
• The Redefine Feature command is exposed to UCS work features in the marking menu.
• CER: The Inventor license activation dialog box crashes after you change the display resolution.
• Browser flyout menu shows up incorrectly in the main display while Inventor works in the secondary display.
• Feature dialog box always docks to top-left position in the graphic view window.
• CER: Inventor crashes when you open a corrupted or incomplete assembly document.
• CER: Inventor crashes when you expand the assembly tree in Design Assistant after the referenced assembly is closed in Inventor.



Service Pack 2:

• CER: Inventor crashes when you double-click Route after undo and redo of the Finish Route command.
• Error message "File not found" displays while you open several Inventor files together in XP operation system.
• CER: Inventor crashes when you open a part file that was created in an Educational version.
• CER: Inventor crashes when you resolve a part file with the active shared project.
• A crash sometimes occurs when you perform a manipulation in the Add-Ins dialog box.

Return to Top

Frame Generator




Service Pack 1:

• If you change a frame member size, constraints are lost.
• Inventor crashes when you cancel the Miter dialog box on a French operating system.
• Length does not update to the correct parameters for a Frame member.



Service Pack 2:

• Length of merged frames is incorrect with non-center orientation.
• CER: Deleting the constraints causes Inventor to shut down.

Return to Top

iLogic




Service Pack 1:

• CER: After you close a drawing that contains an iLogic form with parameters, Inventor crashes when you use Undo and Redo to edit a dimension.
• iLogic Design Copy does not work on 64-bit machines.
• Cannot apply a value to a custom property starting with "_".



Service Pack 2:

• Inventor crashes when you close an Inventor file and then invoke Design Copy and check files to copy.
• In a Vault project, you cannot use the Add Rule command in a drawing if a user is logged in.

Return to Top

Part Modeling




Service Pack 1:

• Inventor crashes if you click a parameter command after you break the link with the base component.
• When a solid becomes a surface because of a deleted face, the surface body folder is not created.
• To insert a PDF file as an OLE link with Abode Reader X, first install the Microsoft hotfix for Knowledge Base article 2457836.
• CER: Inventor crashes if you activate any row of an iAssembly.
• CER: Inventor sometimes crashes if you edit a Taper Thread hole made with Inventor 11.
• CER: Inventor crashes when you create a thread hole or thread feature after you edit the thread.xls using Planmaker.
• Parameters for assembly sketches are not displayed in the parameters dialog box.
• Features based on sketches do not update when Projection to 3D Sketch is enabled.
• When multiple versions of Fusion are installed on a system, the wrong version is sometimes invoked for Solid Edit.
• When using Select Other with a mouse scroll wheel, some of the selection choices are skipped.
• Mini-toolbar disappears after you create a new in-place part.



Service Pack 2:

• When you edit a master sketch, all of the derived parts within the assembly require an update.
• Inventor crashes when you update a derived part.
• Inventor crashes when you use derive with single composite feature style.
• The upstream sketch dimensions are not hidden after you apply a feature.
• A crash occurs when you invoke Hole with one reference edge selected.
• Keep the last input status for options when invoking the Hole command again.
• Inventor crashes when you choose a Cut together with a Work Plane to create iFeature.
• Inventor crashes when you insert an ifeature and then Undo the insert.
• Inventor crashes when you activate the ipart member after you modify its parameter.
• Inventor crashes when you make components to select corrupt solids.
• If the Sheet Metal Parameters folder is collapsed, changing a Model parameter sometimes makes a row unselectable.
• Crash occurs when you create a rectangular pattern using curve length and two across directions.
• Crash occurs when you create a rectangular pattern along some sketch curves.
• Crash occurs if you hit the Backspace key with the Replace face dialog box displayed.
• Inventor crashes when you open a file and then activate the Split command.
• Inventor crashes when you edit a split feature.
• Crashes occur in a Split feature using the Split Into Two Bodies option.
• Inventor crashes when you switch Sweep type from Path to Path & Guide Rail.
• NG: Work features Edge View is incorrect.
• CER: A crash occurs when you refit surfaces imported from Alias in Construction Environment.
• CER: Inventor crashes when you copy a face on a specific model.

Return to Top

Presentation




Service Pack 1:

• Assembly visibility control is broken under the marking menu.



Service Pack 2:

• Inventor locks up when you turn Defer Update off on a drawing.

Return to Top

Repair Environment




Service Pack 1:

• Boundary Trim does not show a preview of the result.
• If a sketch is not closed, and the endpoints are off the curve, a general problem exists with including tolerant geometry as the included sketch geometry. The fix is to ensure the start and end control points of a closed loop are coincident.



Service Pack 2:

None...

Return to Top

Sketch




Service Pack 1:

• CER: A crash occurs when you create a sketch block with deleted patterns geometry.
• Midpoint constraints in 3D sketches are not solving correctly.



Service Pack 2:

• CER: A crash occurs when you generate the sketch block.
• Inventor crashes when you create a block for certain sketch geometries.
• Regress: Bug Alert when copy AutoCAD geometry to Inventor Sketch environment.
• CER: Inventor crashes when you select some lines for a Close Loop.
• CER: A crash occurs when you right-click the Sketch name.
• A crash sometimes occurs when you dynamically drag sketch geometry.
• CER: A crash occurs while you finish editing a 2D sketch.
• Inventor sometimes crashes when you add a linear dimension to a sketch.
• CER: A crash occurs after you click Break link in the Sketch environment.
• CER: Inventor crashes when you move the End of Part.
• CER: A crash occurs after you edit a pattern in a sketch and finish the sketch.
• Inventor crashes after you change the value of a parameter.
• CER: Inventor crashes when you edit a pattern in the 2D sketch.
• A crash occurs when you reduce the count of a sketch pattern to 1 with the parameters.
• A crash occurs after you delete a constraint in a 3D sketch.

Return to Top

Studio




Service Pack 1:

• CER: Inventor crashes when rendering a large assembly.



Service Pack 2:

None...

Return to Top

Translators




Service Pack 1:

• A crash occurs when you export to IGS/STP in the Engineer's Notebook environment.
• CER: Inventor sometimes crashes while exporting to PDF.
• Inventor is unable to read SolidWorks 2011 files.
• When reading JT files that contain many disconnected shells within a single body, performance is slow.
• After importing an MDT file, sketch dimensions and radial dimensions are missing.
• Publishing a PDF of the current sheet updates all sheets in the drawing.
• When you save an Inventor Assembly in the CATIA V5 format, and the files contain modeling errors, you cannot export some components.
• Importing a CATIA V5 file sometimes results in an incorrect face normal.
• Switching visibility of sub-assemblies or parts in an imported assembly throws a message about design view representation associativity.
• The options for export face and surface change when you save as DWG/DXF.
• User-customized iProperties are ignored in JT import and export.
• Very poor performance occurs when exporting Inventor .dwg as AutoCAD Mechanical .dwg with the option "Parts only" checked.
• CER: A crash occurs when you open CATIA V5 R20 files that are created with a service pack or hotfix.
• The image in the drawing is not correctly exported to PDF.
• Corrupted files are created when generating new DWF files in batch mode.



Service Pack 2:

• Inappropriate geometry is generated when you export certain drawings to PDF/DWF.
• Fix copying/pasting AutoCAD object to Inventor.
• Export to DXF with Pack and Go option checked does not create a zip file in 64 bit operating systems.
• Empty files sometimes occur in Inventor when it reads STEP files.
• Wrong STEP AP203 schema is used when exported.
• CER: A crash occurs when you save some specific files to STL on a 32 bit XP operating system.
• A crash occurs when Inventor reads CATIA files when the translation report does not embed successfully.

Return to Top

Vault




Service Pack 1:

• After Checking in iParts, a missing file warning displays, even if the files are in the correct place when you open the Assembly.
• Data Mapping Report does not show Tables inside Reports for some of the Sample Report Templates.
• During Open from Vault, Inventor crashes when the last used folder is not available in the Vault.
• In some cases, when you check in the derived parts/assemblies, they show as attachments in the Vault Explorer Uses tab. This service pack does not allow Inventor files to become attachments in the Uses Tab.
• Inventor crashes during Vault Operations after you log out of the Content Center Server and remain logged into the Vault Server.
• Inventor crashes when you use Undo twice while editing a sketch by adding notes.
• When invoking Open from Vault, the default folder is always $.
• When placing a part in a large assembly while logged in to the vault, performance of Place Component is slow.
• When the file on the local disk is newer or older, selecting a file for checkout from the Get Revision dialog downloads the latest version but fails to check it out.
• Inventor crashes when opening iPart members that were renamed in Vault Explorer.
• Enabling visibility of a part sketch in an Assembly model view does not prompt the user to Check Out the assembly.
• When non-master LOD is active, working with assemblies displays a flickering Vault Update status dialog.
• When Inventor DWG is checked in with Defer Update, this option is not regarded during successive open.
• Inventor crashes when an IDW file is kept open with the Defer Update option, and you use Getting Revision on one of its renamed parts.



Service Pack 2:

• Check out prompts appear multiple times, even after you Clicking No To All.
• Soap Exception error 1000 appears when you try to migrate or Check out using Task Scheduler.
• Files become dirtied without a Check Out prompt during Open from Vault.
• Add YESTOALL and NOTOALL options to Check out Prompts when they are appearing for Individual file.

Return to Top

Autodesk Inventor, Autodesk Vault, Autodesk Data Management Server, Autodesk Productstream, Autodesk Autoloader, AutoCAD, AutoCAD Mechanical, Mechanical Desktop, and AutoCAD Electrical, are trademarks or registered trademarks of Autodesk, Inc. in the United States and/or other countries.




Windows 2000, Windows 2003 server, Windows 2000 server, Windows XP, Windows Vista, Windows 7, Microsoft Office XP, Microsoft Office 2000, Microsoft Office 2003, Microsoft Office 2007, Microsoft Word, Microsoft PowerPoint, and Microsoft Excel are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Portions of this software copyright 1996-2008 Acresso Corporation.




All other trademarks are the property of their respective owners.

Return to Top

We thank all our customers who identified these issues and reported them to us. These reports give us the opportunity to improve the product and provide you with the best solution in mechanical design. We also thank you for your continued business and for the feedback regarding the content of this update release.




Respectfully,




Autodesk Inventor Product Team

Return to Top

Copyright ^© 2012 Autodesk, Inc.