2012 年 2 月 24 日
リリース ノート - Readme ファイル
Autodesk, Inc.
オートデスクは Autodesk Inventor LT 2013 をリリースしました。この Readme は、当リリースに関する重要な既知の問題について説明し、Inventor LT のインストールおよび使用時に役立つ情報を提供します。
Autodesk Inventor LT 2013 のディスク要件
Inventor LT のディスク要件と前提条件のディスク要件の合計を示します。
システム | 必要なディスク容量 | |
Windows 32 ビット | 合計 - 3.2 GB | システム ドライブ(必須) – 2.3 GB |
Windows 64 ビット | 合計 - 4.3 GB | システム ドライブ(必須) – 2.7 GB |
作業を開始する前に
Windows XP の場合: [コントロール パネル]にある Windows Update ユーティリティから実行できます。
Windows 7 の場合: [コントロール パネル]とサイドバーにある Windows Update ユーティリティから実行できます。
場合によっては、オペレーティング システムを最新の状態にするために、Windows Update を複数回実行する必要があります。
Autodesk Inventor LT 2013 をインストールするには:
解凍されたファイルは、一時フォルダに保存されます。任意のフォルダが深い階層にあると、長いパス名をオペレーティング システムが認識できないというエラーが発生する可能性があります。解凍先フォルダのパス名を 90 文字未満にするか、インストール ファイルの保存先フォルダは、既定の保存先フォルダを使用することをお勧めします。
重要: 言語を切り替えたり、Language Pack を追加する場合は、その他の基本設定を設定する前に、必ずその言語を参照して該当するオプションを設定してください(Language Pack を変更すると、一部のインストールの基本設定が既定値にリセットされるため)。
詳細については、Autodesk Inventor LT 2013 のインストーラ左下のリンクにある『インストレーション ヘルプ』を参照してください。
インストールが完了したら、Autodesk Inventor LT を起動して、正常にインストールされていることを確認できます。[ヘルプ]メニューの[バージョン情報 Autodesk Inventor LT]を選択します。[Autodesk Inventor LT バージョン情報]ダイアログ ボックスに「Build: 138, Release: 2013」と表示されている場合は、正常にインストールされています。
Autodesk Inventor LT 2013 をアンインストールするには:
Windows の[コントロール パネル]にあるアンインストール機能を使用して、Autodesk Inventor LT 2013 および関連する製品とコンポーネントをアンインストールします。
Direct Translator でサポートしているファイルのバージョン
トランスレータ | インポート | エクスポート |
Alias | v10 以上 | |
CATIA V4 | すべてのリビジョン | |
CATIA V5 | R6~R21 | R10~R20 |
Creo Parametric | 1.0 | |
IGES | すべてのリビジョン | 5.3 |
JT | 7.0; 8.0; 8.1; 8.2; 9.0; 9.1; 9.2; 9.3; 9.4; 9.5 | 7.0; 8.0; 8.1; 8.2; 9.0; 9.1; 9.2; 9.3; 9.4; 9.5 |
NX | 3-8.0 | |
Parasolid | 24.0 まで | 9.0-24.0 |
Pro/ENGINEER | Wildfire 5.0 まで | |
Pro/ENGINEER Granite | 7.0 まで | 1.0-7.0 |
Pro/ENGINEER Neutral | N/A | N/A |
Rhino | 5.0 まで | |
SAT | 7.0 まで | 7.0 |
SolidWorks | 2003-2012 | |
STEP | AP214、AP203E2 | AP214、AP203E2 |
STL | N/A | N/A |
XGL/ZGL | N/A |
使用される略語:
Consistent Materials
表示関連機能
全体
ヘルプと学習ソリューション
言語の切り替え
パーツ モデリング
スケッチ
トランスレータ
[再インストール]および[機能を追加/削除]
Autodesk Inventor, Autodesk Inventor LT, Autodesk Vault, Autodesk Data Management Server, Autodesk Productstream, Autodesk Autoloader, AutoCAD, AutoCAD Mechanical, Mechanical Desktop, and AutoCAD Electrical, are trademarks or registered trademarks of Autodesk, Inc. in the United States and/or other countries.
Windows 2000, Windows 2003 server, Windows 2000 server, Windows XP, Windows 7, Microsoft Office XP, Microsoft Office 2000, Microsoft Office 2003, Microsoft Office 2007, Microsoft Word, Microsoft PowerPoint, and Microsoft Excel are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Portions of this software copyright 1996-2008 Acresso Corporation.
All other trademarks are the property of their respective owners.
問題を特定して弊社に報告してくださるすべてのお客様に感謝いたします。お客様からのご意見は、弊社が製品を改善し、お客様に機械設計の最適なソリューションを提供するための参考とさせていただきます。また弊社は、お客様の継続的なご利用と、このリリースの内容に関するフィードバックにも感謝いたします。
ありがとうございます
Autodesk Inventor LT 製品チーム一同
Copyright © 2012 Autodesk, Inc.