Autodesk Network License Manager IPv6 Support Readme for 64-bit Windows

This Readme contains information about downloading and updating the Autodesk Network License Manager files required for IPv6 support.


Contents


Supported Operating System


Downloading and Updating IPv6 Support Files

You must already have the Autodesk Network License Manager installed in order to apply the IPv6 Support update. If you do not already have the Autodesk Network License Manager installed on your server, refer to the Network Licensing Guide in the Help system for installation instructions.

To download the IPv6 Support software

Before you can perform any system maintenance on your license server, including updates, you must stop the license server. When you have completed the update, you must restart the license server.

To stop the Network License Server

You should be logged in with Administrator rights when working with the LMTOOLS utility.

  1. Right-click the LMTOOLS icon on the desktop and click Run As Administrator.
  2. In the LMTOOLS program, click the Start/Stop/Reread tab.
  3. On the Start/Stop/Reread tab, click Stop Server, wait 15 seconds, and then proceed.
  4. Close lmtools.exe.
  5. Locate the existing installed Autodesk Network License Manager files: lmtools.exe, lmutil.exe, lmgrd.exe, and adskflex.exe. Their default location is C:\Program Files\Autodesk Network License Manager\.
  6. Create a back-up copy of the existing Network License Manager files.

To update the Autodesk Network License Manager for IPv6

  1. Double-click the nlm11.11_ipv6_win64.exe file on your desktop. The IPv6 Support files, lmtools.exe, lmutil.exe, lmgrd.exe, and adskflex.exe, are extracted to C:\install\Autodesk\NLMIPv6Support_Win64.
  2. Copy the new IPv6 Support files from C:\install\Autodesk\NLMIPv6Support_Win64 to the location where your existing Autodesk Network License Manager is installed.
  3. When prompted to replace the existing files, click Yes.

To restart the Network License Server

You should be logged in with Administrator rights when working with the LMTOOLS utility.

  1. Right-click the LMTOOLS icon on the desktop and click Run As Administrator.
  2. In the LMTOOLS program, click the Start/Stop/Reread tab.
  3. On the Start/Stop/Reread tab, click Start Server.
  4. Close lmtools.exe.

Feature Limitations and Notes

Environment


Copyright ® 2012 Autodesk, Inc.