Revit 2010 Hotfix - Wall Modifications

Description of Problem

This hotfix addresses issues related to deleting or modifying walls, a crash may occur.


Affected Products


Installation Instructions

NOTE: You must have administrative privileges on your Microsoft® Windows® operating system to complete the installation process.

NOTE: You must have Autodesk® Revit® 2010 Update 1 installed on the system in order to apply this hotfix.

This installation requires you to replace the following file:



To Install the Hotfix on a 32-bit system on Autodesk® Revit® Architecture 2010

  1. Close all software applications.
  2. Make sure the Autodesk® Revit® Architecture 2010 Update 1 is installed on the system.
  3. Navigate to your product installation folder; for example C:\Program Files\Autodesk Revit Architecture 2010\Program
  4. Rename the affected original file.
  5. Extract the RevitDB.dll located in the Revit_2010_WallModification_Hotfix_x32.zip to C:\Program Files\Autodesk Revit Architecture 2010\Program


To Install the Hotfix on a 64-bit system on Autodesk® Revit® Architecture 2010

  1. Close all software applications.
  2. Make sure the Autodesk® Revit® Architecture 2010 Update 1 is installed on the system.
  3. Navigate to your product installation folder; for example C:\Program Files\Autodesk Revit Architecture 2010\Program
  4. Rename the affected original file.
  5. Extract the RevitDB.dll located in the Revit_2010_WallModification_Hotfix_x64.zip to C:\Program Files\Autodesk Revit Architecture 2010\Program


To Install the Hotfix on a 32-bit system on Autodesk® Revit® Structure 2010

  1. Close all software applications.
  2. Make sure the Autodesk® Revit® Structure 2010 Update 1 is installed on the system.
  3. Navigate to your product installation folder; for example C:\Program Files\Autodesk Revit Structure 2010\Program
  4. Rename the affected original file.
  5. Extract the RevitDB.dll located in the Revit_2010_WallModification_Hotfix_x32.zip to C:\Program Files\Autodesk Revit Structure 2010\Program


To Install the Hotfix on a 64-bit system on Autodesk® Revit® Structure 2010

  1. Close all software applications.
  2. Make sure the Autodesk® Revit® Structure 2010 Update 1 is installed on the system.
  3. Navigate to your product installation folder; for example C:\Program Files\Autodesk Revit Structure 2010\Program
  4. Rename the affected original file.
  5. Extract the RevitDB.dll located in the Revit_2010_WallModification_Hotfix_x64.zip to C:\Program Files\Autodesk Revit Structure 2010\Program

 

To Install the Hotfix on a 32-bit system on Autodesk® Revit® MEP 2010

  1. Close all software applications.
  2. Make sure the Autodesk® Revit® MEP 2010 Update 1 is installed on the system.
  3. Navigate to your product installation folder; for example C:\Program Files\Autodesk Revit MEP 2010\Program
  4. Rename the affected original file.
  5. Extract the RevitDB.dll located in the Revit_2010_WallModification_Hotfix_x32.zip to C:\Program Files\Autodesk Revit MEP 2010\Program


To Install the Hotfix on a 64-bit system on Autodesk® Revit® MEP 2010

  1. Close all software applications.
  2. Make sure the Autodesk® Revit® MEP 2010 Update 1 is installed on the system.
  3. Navigate to your product installation folder; for example C:\Program Files\Autodesk Revit MEP 2010\Program
  4. Rename the affected original file.
  5. Extract the RevitDB.dll located in the Revit_2010_WallModification_Hotfix_x64.zip to C:\Program Files\Autodesk Revit MEP 2010\Program