Accessing the Colour Corrector from Modular Keyer, Action, or Paint

You can colour correct clips loaded into the MOdular Keyer, Action or Paint.

Back clips and key-in clips cannot be colour corrected.

To access the Colour Corrector from the Modular Keyer:

1. Double-click on, or drag, the Colour Correct node from the node bar to the schematic.
2. Double-click the Colour Correct node.

   You are in the Colour Correct editor.

To access the Colour Corrector from Action:

1. From the Media menu, select the media containing the clip you want to colour correct.
2. Double-click the CC field for the media you want to colour correct.

   The clip is loaded into the Colour Corrector.

To access the Colour Corrector from Paint:

1. Do one of the following:
   • To colour correct a clip, click Setup in the Paint menu, click CutOut, enable CC, and then enable the CC button for the clip you want to colour correct.

     The clip is loaded into the Colour Corrector.

   • To colour correct a cutout, click Cut/Paste in the Paint menu, create a cutout, and then use the Colour Correction field or click CC.

     The cutout is loaded into the Colour Corrector.