AddCurve (NurbsCurveList) *

Description

Add a curve to the end of the curve list

Scripting Syntax

NurbsCurveList.AddCurve( ControlPoints, [Knots], [Closed], [Degree], [Parameterization], [NurbsFormat] )

C# Syntax

NurbsCurve NurbsCurveList.AddCurve( Object in_vsaControlPoints, Object in_vsadKnots, Boolean in_bClosed, Int32 in_lDegree, siKnotParameterization in_eParam, siNurbsFormat in_eNurbsFormat );

Parameters

Parameter	Type	Description
ControlPoints	1D or 2D Array	The control points used for creating the nurbs surface. The control points can be stored in a 1 dimensional array or in a 2 dimensional matrix (Ux4) of x,y,z,w values. The 1 dimensional array should contain a sequence of x,y,z,w values e.g. {Xo,Yo,Zo,...X(n-1),Y(n-1),Z(n-1),W(n-1)}.
Knots	Array of Doubles	An array of knot values.
Closed	Boolean	Specifies whether the nurbs surface is closed or not in U direction. Default Value: False
Degree	Long	Degree of the nurbs surface in U direction. Default Value: 3
Parameterization	siKnotParameterization	The parameterization factor of the nurbs surface in U direction. Default Value: siNonUniformParameterization
NurbsFormat	siNurbsFormat	Specifies how the data is formatted. Default Value: siSINurbs

Return Value

NurbsCurve

Examples

VBScript Example

Dim lDegree, bClosed, eParameterization, aControlVertex, aKnots
set oRoot = application.activeproject.activescene.root

set oSpiral = oRoot.AddGeometry( "Spiral", "NurbsCurve" )
set oArc = oRoot.AddGeometry( "Arc", "NurbsCurve" )
set oNurbsCurveList = oRoot.AddNurbsCurveList()

oSpiral.ActivePrimitive.Geometry.Curves(0).GetData _
   aControlVertex, _
   aKnots, _
   bClosed, _
   lDegree, _
   eParameterization, _
   siSINurbs

' add spiral data to  nurbs curve list.
call oNurbsCurveList.activeprimitive.geometry.AddCurve( _
   aControlVertex, _
   aKnots, _
   bClosed, _
   lDegree, _
   eParameterization, _
   siSINurbs )

oArc.ActivePrimitive.Geometry.Curves(0).GetData _
   aControlVertex, _
   aKnots , _
   bClosed, _
   lDegree, _
   eParameterization, _
   siSINurbs

' add arc data to  nurbs curve list.
call oNurbsCurveList.activeprimitive.geometry.AddCurve( _
   aControlVertex, _
   aKnots, _
   bClosed, _
   lDegree, _
   eParameterization, _
   siSINurbs )

Autodesk Softimage v7.5