U

UserPreference

Description

All user preference string constants.

Note: You can use either the name of the constant (under the Constant column) or the string it represents (under the Value column), as long as you remember that the Value is a string (so you need to use quotation marks), but the Constant is an enum, so you can't use quotation marks.

C# Syntax

StringModule.siAutoInspect                                                  // AutoInspectEnabled
StringModule.siCompensationFlag                                             // SI3D_CONSTRAINT_COMPENSATION_MODE
StringModule.siCustomCommandLibCache                                        // CustomCommandLibCache
StringModule.siCustomOperatorLibCache                                       // CustomOperatorLibCache
StringModule.siDisplayCallbackLibCache                                      // DisplayCallbackLibCache
StringModule.siDisplayLibCache                                              // DisplayLibCache
StringModule.siDisplayPassLibCache                                          // DisplayPassLibCache
StringModule.siEventLibCache                                                // EventLibCache
StringModule.siFilterLibCache                                               // FilterLibCache
StringModule.siMenuLibCache                                                 // MenuLibCache
StringModule.siPropertyLibCache                                             // PropertyLibCache
StringModule.siRTShaderLibCache                                             // RealTimeShaderLibCache
StringModule.siScrCommandLogEnabled                                         // SCR_CMDLOG_ENABLED
StringModule.siScrCommandLogFileName                                        // SCR_CMDLOG_FILENAME
StringModule.siScrCommandLogMaxSize                                         // SCR_CMDLOG_MAXSIZE
StringModule.siScrCommandLogToFile                                          // SCR_CMDLOG_TOFILE
StringModule.siScrCommandLogUnlimitedSize                                   // SCR_CMDLOG_UNLIMITEDSIZE
StringModule.siScrLanguage                                                  // ScriptLanguage
StringModule.siScrMessageLogEnabled                                         // SCR_MSGLOG_ENABLED
StringModule.siScrRealTimeMessagingEnabled                                  // SCR_RTMSG_ENABLED
StringModule.siTimeDisplayFormatDisplayAsFrames                             // SI3D_TIMEDISPLAYFORMAT_DISPLAYASFRAMES
StringModule.siTimeDisplayFormatDisplayUserFormat                           // SI3D_TIMEDISPLAYFORMAT_DISPLAYUSERFORMAT
StringModule.siTimeDisplayFormatUserFormat                                  // SI3D_TIMEDISPLAYFORMAT_USERFORMAT
StringModule.siTimeFormatDefaultFrameFormat                                 // SI3D_TIMEFORMAT_DEFAULTFRAMEFORMAT
StringModule.siTimeFormatDefaultFrameRate                                   // SI3D_TIMEFORMAT_DEFAULTFRAMERATE
StringModule.siTransformAxisMode                                            // 3D_TRANSFO_EDITED_AXIS_CHANGED
StringModule.siTransformRefMode                                             // 3D_TRANSFO_REFERENTIAL_CHANGED
StringModule.siUILayoutDefault                                              // UI_LAYOUT_DEFAULT

Constant	Value	Description
siAutoInspect	AutoInspectEnabled	TRUE to force the property dialogs to automatically pop up on object creation. Corresponds to User Preferences > Interaction > General > Automatically Popup Property Editors on Node Creation in the User Interface. Note: This preference cannot be changed permanently via scripting. See Property Editor Automatic Inspection for more information.
siCompensationFlag	SI3D_CONSTRAINT_COMPENSATION_MODE	Toggle the Comp button in the Constrain panel. Possible values are: 0 = off 1 = on Corresponds to Constrain < Compensation in the main-menu.
siCustomCommandLibCache	CustomCommandLibCache	This preference enables or disables the custom command library cache. Disabling the cache allows developers to recompile an add-on library without having to unload it explicitly. Disabling a cache can drastically affect the performance of Softimage, therefore it is recommended to disable it only in the context of add-ons development. For performance reasons, the state of the cache is not persisted with the scene. By default the cache is enabled at startup, therefore users have to disable it at each session.
siCustomOperatorLibCache	CustomOperatorLibCache	This preference enables or disables the custom operator library cache. Disabling the cache allows developers to recompile an add-on library without having to unload it explicitly. Disabling a cache can drastically affect the performance of Softimage, therefore it is recommended to disable it only in the context of add-ons development. For performance reasons, the state of the cache is not persisted with the scene. By default the cache is enabled at startup, therefore users have to disable it at each session.
siDisplayCallbackLibCache	DisplayCallbackLibCache	This preference enables or disables the custom display callback library cache. Disabling the cache allows developers to recompile a plug-in library without having to unload it explicitly. Disabling a cache can drastically affect the performance of Softimage, therefore it is recommended to disable it only in the context of add-ons development. For performance reasons, the state of the cache is not persisted with the scene. By default the cache is enabled at startup, therefore users have to disable it at each session.
siDisplayLibCache	DisplayLibCache	This preference enables or disables the custom view library cache. Disabling the cache allows developers to recompile a plug-in library without having to unload it explicitly. Disabling a cache can drastically affect the performance of Softimage, therefore it is recommended to disable it only in the context of add-ons development. For performance reasons, the state of the cache is not persisted with the scene. By default the cache is enabled at startup, therefore users have to disable it at each session.
siDisplayPassLibCache	DisplayPassLibCache	This preference enables or disables the custom display pass library cache. Disabling the cache allows developers to recompile a plug-in library without having to unload it explicitly. Disabling a cache can drastically affect the performance of Softimage, therefore it is recommended to disable it only in the context of add-ons development. For performance reasons, the state of the cache is not persisted with the scene. By default the cache is enabled at startup, therefore users have to disable it at each session.
siEventLibCache	EventLibCache	This preference enables or disables the event library cache. Disabling the cache allows developers to recompile an add-on library without having to unload it explicitly. Disabling a cache can drastically affect the performance of Softimage, therefore it is recommended to disable it only in the context of add-ons development. For performance reasons, the state of the cache is not persisted with the scene. By default the cache is enabled at startup, therefore users have to disable it at each session.
siFilterLibCache	FilterLibCache	This preference enables or disables the custom filter library cache. Disabling the cache allows developers to recompile a plug-in library without having to unload it explicitly. Disabling a cache can drastically affect the performance of Softimage, therefore it is recommended to disable it only in the context of add-ons development. For performance reasons, the state of the cache is not persisted with the scene. By default the cache is enabled at startup, therefore users have to disable it at each session.
siMenuLibCache	MenuLibCache	This preference enables or disables the custom menu library cache. Disabling the cache allows developers to recompile a plug-in library without having to unload it explicitly. Disabling a cache can drastically affect the performance of Softimage, therefore it is recommended to disable it only in the context of add-ons development. For performance reasons, the state of the cache is not persisted with the scene. By default the cache is enabled at startup, therefore users have to disable it at each session.
siPropertyLibCache	PropertyLibCache	This preference enables or disables the custom property library cache. Disabling the cache allows developers to recompile a plug-in library without having to unload it explicitly. Disabling a cache can drastically affect the performance of Softimage, therefore it is recommended to disable it only in the context of add-ons development. For performance reasons, the state of the cache is not persisted with the scene. By default the cache is enabled at startup, therefore users have to disable it at each session.
siRTShaderLibCache	RTShaderLibCache	This preference enables or disables the Realtime shader library cache. Disabling the cache allows developers to recompile an add-on library without having to unload it explicitly. Disabling a cache can drastically affect the performance of Softimage, therefore it is recommended to disable it only in the context of add-ons development. For performance reasons, the state of the cache is not persisted with the scene. By default the cache is enabled at startup, therefore users have to disable it at each session.
siScrCommandLogEnabled	SCR_CMDLOG_ENABLED	Set to True to enable command execution logging in the scripting history window.
siScrCommandLogFileName	SCR_CMDLOG_FILENAME	Use this user preference to specify the name of the file to use for logging commands and messages. Use siSrcCommandLogToFile to enable logging to file.
siScrCommandLogMaxSize	SCR_CMDLOG_MAXSIZE	Use this user preference to get and set the maximum size for the scripting command/message log.
siScrCommandLogToFile	SCR_CMDLOG_TOFILE	Set to True to log the scripting command/message to a file. Use siSrcCommandLogFileName to specify the log file name.
siScrCommandLogUnlimitedSize	SCR_CMDLOG_UNLIMITEDSIZE	Set to True to allow the scripting command/message log to be of an unlimited size.
siScrLanguage	SCR_LANGUAGE	Use this user preference to get and set the preferred scripting language. Possible values are: "VB Script Language" "JScript Language" "PerlScript Language" "Python ActiveX Scripting"
siScrMessageLogEnabled	SCR_MSGLOG_ENABLED	Set to True to enable message logging in the scripting history window.
siScrRealTimeMessagingEnabled	SCR_RTMSG_ENABLED	Set to True to enable real-time message logging in the scripting history window. Messages are delivered immediately as they arrive instead of reported at the end of the command execution.
siTimeDisplayFormatDisplayAsFrames	SI3D_TIMEDISPLAYFORMAT_DISPLAYASFRAMES	Set to True to display time as frame.
siTimeDisplayFormatDisplayUserFormat	SI3D_TIMEDISPLAYFORMAT_DISPLAYUSERFORMAT	Set to True to use the default frame format or false for a user selected format for display purposes.
siTimeDisplayFormatUserFormat	SI3D_TIMEDISPLAYFORMAT_USERFORMAT	Use this user preference to specify the user display frame format. The value will be corresponding to siDisplayTimeFormat.
siTimeFormatDefaultFrameFormat	SI3D_TIMEFORMAT_DEFAULTFRAMEFORMAT	Use this user preference to specify the default frame format. The value will be corresponding to siDefaultTimeFormat.
siTimeFormatDefaultFrameRate	SI3D_TIMEFORMAT_DEFAULTFRAMERATE	Use this user preference to access the default frame rate.
siTransformAxisMode	3D_TRANSFO_EDITED_AXIS_CHANGED	Set the Transformation Axis Mode. The values to provide are actually bitmasks with bit zero for X, bit one for Y, and bit two for Z.
siTransformRefMode	3D_TRANSFO_REFERENTIAL_CHANGED	Set the Manipulation Mode Values values for a list of possible values.
siUILayoutDefault	UI_LAYOUT_DEFAULT	Use this user preference to specify the default current layout that will be used when starting Softimage.

Applies To

Autodesk Softimage v7.5