Creates a random spark or firework effect. The number and nature of the sparks can be controlled.
Requires an Input (Any).
Produces an Output (Any).
|
Birth Rate |
Sets the number of sparks generated every frame. Set any floating-point value using the treadmill. |
|
Life Time |
Sets how long each spark lives in frames. Set any floating-point value using the treadmill. |
|
Length |
Sets the cumulative exposure of the sparks; if set to 3 ¦ you will get what would be seen if a notional camera shutter had been left open for the last 3 frames. Set any floating-point value using the treadmill. |
|
Speed Bias X/Y |
Set the bias to the direction of the sparks; these values are added to the initial random directions. Set any floating-point values in pixels per frame using the treadmills. |
|
Link Speed |
If animating the center, causes the movement of the center to be added on to the movement of the sparks. |
|
Center X/Y/Z |
Set the center of the effect as a normalized proportion of the image. Set any floating-point values using the treadmills. The Z value has no effect. |
|
Speed |
Sets the value around which the speed of the sparks is randomized. Set any floating-point value using the treadmill. |
|
Gravity |
Sets the attraction of the sparks downwards or upwards. Set any floating-point value using the treadmill; positive values attract the sparks downwards, negative values attract them upwards. |
|
Air Resistance |
Set the air resistance. Set any floating-point value using the treadmill; the higher the value, the less the sparks will radiate outwards. |
|
Wind X/Y |
Set a notional directional wind, which affects the trajectory of the sparks. Set floating-point values between -100 and 100 using the treadmills. Air Resistance must be greater than 0 for Wind to have an effect. |
|
Turbulence |
Adds randomness to the movement of the sparks. Set a floating-point value between 0 and 100 using the treadmill. |
|
Glow Radius |
Sets the radius of the glow in pixels. Set a floating-point pixel value between 0.1 and 40 using the treadmill. |
|
Glow Color |
Sets the color of the glow. |
|
Core Radius |
Sets the radius of the core in pixels. Set a floating-point pixel value between 0.1 and 10 using the treadmill. |
|
Core Color |
Sets the color of the core. |
Controls this operator’s Mask Options.
Controls this operator’s Output Options.
Autodesk Softimage v.7.5