====================================== Notice to Autodesk Inventor Customers ====================================== In a continuing effort to provide high quality products, Autodesk has released Hotfix TS1079646 which addresses an issue within Autodesk Inventor 11, Autodesk Inventor 11 DWF Extension and Autodesk Inventor 2008 where After installing SP3 some mapped drives are not available in project. This README file highlights how to install, and other important information regarding this update. ================================================================================ CONTENTS ========= - Description of the issue - System Requirements - Warnings - Installation Instructions ================================================================================ Description of the issues: ========================= - After installing SP3 some mapped drives are not available in project ================================================================================ System Requirements: ==================== IMPORTANT! The file TS1079646.zip contains two MSP files. Depending on what version of Inventor 11 you have installed, you will need to install the corresponding hotfix (MSP). For TS1079646_R11SP3.msp: - Autodesk Inventor® Series 11 Service Pack 3 - Autodesk Inventor® Professional 11 Service Pack 3 For TS1079646_R11DWFExt_SP3.msp - Autodesk Inventor® Series 11 DWF Extension Service Pack 3 - Autodesk Inventor® Professional 11 DWF Extension Service Pack 3 For TS1079646_AI2008_SP2.msp - Autodesk Inventor® Suite 2008 Service Pack 2 - Autodesk Inventor® Professional 2008 Service Pack 2 ================================================================================ Warnings: ========= This hotfix should only be applied to systems directly affected by the issue described above. This is the only issue for which this hotfix has been created to address. ================================================================================ Installation Instructions: ========================== IMPORTANT! The file TS1079646.zip contains two MSP files. Depending on what version of Autodesk Inventor you have installed, you will need to install the corresponding hotfix (MSP). If you have Autodesk Inventor 11 SP3 installed: 1. Download Hotfix TS1079646. 2. Extract TS1079646_R11SP3.MSP from TS1079646.ZIP. 3. Double click on TS1079646_R11SP3.MSP to install this Hotfix on each system running Autodesk Inventor 11 SP3. 4. Click Next to begin the install. Once finished you'll receive the "Autodesk Inventor 11 update" dialog box stating that the update has been successfully applied. 5. Click Finish to complete the install and exit the dialog. If you have Autodesk Inventor 11 DWF Extension SP3 installed: 1. Download Hotfix TS1079646. 2. Extract TS1079646_R11DWFExt_Sp3.MSP from TS1079646.ZIP. 3. Double click on TS1079646_R11DWFExt_SP3.MSP to install this Hotfix on each system running Autodesk Inventor 11 DWF Extension SP3. 4. Click Next to begin the install. Once finished you'll receive the "Autodesk Inventor 11 update" dialog box stating that the update has been successfully applied. 5. Click Finish to complete the install and exit the dialog. If you have Autodesk Inventor 11 SP3 installed and are are also using Vault 2008: 1. Download Hotfix TS1079646. 2. Extract TS1079646_R11SP3.MSP from TS1079646.ZIP. 3. Using the Windows Control Panel, remove the Autodesk Inventor 11 SP3 Client Upgrade for ADMS 2008 from your computer. 4. Double click on TS1079646_R11SP3.MSP to install this Hotfix on each system running Autodesk Inventor 11 SP3. 5. Click Next to begin the install. Once finished you'll receive the "Autodesk Inventor 11 update" dialog box stating that the update has been successfully applied. 6. Click Finish to complete the install and exit the dialog. 7. Finally, reinstall the Autodesk Inventor 11 SP3 Client Upgrade for ADMS 2008. The Autodesk Inventor 11 SP3 Client Upgrade for ADMS 2008 can be downloaded from the link below: http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=9823033&linkID=9242019 If you have Autodesk Inventor 11 DWF Extension SP3 installed and are are also using Vault 2008: 1. Download Hotfix TS1079646. 2. Extract TS1079646_R11DWFExt_Sp3.MSP from TS1079646.ZIP. 3. Using the Windows Control Panel, remove the Autodesk Inventor 11 SP3 Client Upgrade for ADMS 2008 from your computer. 4. Double click on TS1079646_R11DWFExt_SP3.MSP to install this Hotfix on each system running Autodesk Inventor 11 DWF Extension SP3. 5. Click Next to begin the install. Once finished you'll receive the "Autodesk Inventor 11 update" dialog box stating that the update has been successfully applied. 6. Click Finish to complete the install and exit the dialog. 7. Finally, reinstall the Autodesk Inventor 11 DWF Extension SP3 Client Upgrade for ADMS 2008. The Autodesk Inventor 11 DWF Extension SP3 Client Upgrade for ADMS 2008 can be downloaded from the link below: http://usa.autodesk.com/adsk/servlet/ps/dl/item?siteID=123112&id=9823033&linkID=9242019 If you have Autodesk Inventor 2008 Service Pack 2 installed: 1. Download Hotfix TS1079646. 2. Extract TS1079646_AI2008_SP2.MSP from TS1079646.ZIP downloaded in step 1. 3. Double click on TS1079646_AI2008_SP2.MSP to install this Hotfix on each system running Autodesk Inventor 2008. 4. Chose Next to begin the install. 5. Once finished you'll receive the "Autodesk Inventor 2008 update" dialog box stating that the update has been successfully applied. Click Finish to complete the install and exit the dialog. =============================================================================== We want to thank all our customers who identified this issue and reported it to us. It's these reports that give us the opportunity to improve the product and provide you, our customers, with the best solution in Mechanical design. Autodesk would also like to take this opportunity to thank you for your continued business and for the feedback regarding the content of this update release. Thank you! Respectfully, Autodesk Mechanical Team