Autodesk®
TS1107387 - 2009 Autodesk Productstream SolidWorks Add In Hotfix
In a continuing effort to provide high quality products, Autodesk has released this hotfix which provides
a DWF creation update for the Autodesk Productstream 2009 SolidWorks Add-In.
This README file highlights how to install this hotfix and other important information regarding this update.
Description of the Issues
System Requirements
Related Hotfixes
Known Issues
Warnings
Files Affected
Update Verification
Installation Instructions
Description of the Issues
This hotfix resolves a problem where the function 'Add files' doesn't create a DWF for a child although the
option [Apply to children] is selected.
Autodesk Productstream 2009 SolidWorks Add-In
When creating a DWF file from a drawing a message pops up if the Autodesk DWFWriter-AddIn (Publish DWF) is
activated in SolidWorks.
Adsk.PDM.CAD.SolidWorksAddIn.dll : (2.0.1.4)
Adsk.PDM.CAD.SolidWorksAddIn.tlb : (none)
Adsk.PDM.ProductstreamLibrary.dll : (2.0.1.4)
Adsk.PDM.ProductstreamLibrary.dll.config : (none)
Adsk.PDM.ProductstreamLibrary.XmlSerializers.dll : (2.0.1.4)
Adsk.Logging.dll : (2.0.0.4)
Adsk.PDM.CommonLibrary.dll : (2.0.0.4)
Adsk.PDM.TypeLibrary.dll : (2.0.0.4)
Interop.SldWorks.dll : (16.0.0.0)
Interop.SwConst.dll : (16.0.0.0)
Interop.SwDWFPublisherLib.dll : (1.0.0.0)
Interop.SWPublished.dll : (16.0.0.0)
solidworkstools.dll : (2.0.0.0)
PrintDWF_Inch.zip : (none)
PrintDWF_Zoll.zip : (none)
de\guitext.txt : (none)
en\guitext.txt : (none)
Version: 2.0.1.4
Installation Instructions
- Download the hotfix to a temporary directory on the workstation.
- Unzip the package into the appropriate folders; the new files should be copied into the 'SolidWorks Addin 2009'
directory on the client machine. All existing files must be replaced.
- Check the local Paper size definitions from 'Autodesk DWF Writer for 2D'.
- If some paper sizes are named similar to 'ANSI A: 8.5 x 11 in' then unzip the file PrintDWF_Inch.zip into the
'SolidWorks Addin 2009' directory.
- If some paper sizes are named similar to 'ANSI A: 8,5 x 11 Zoll' then unzip the file PrintDWF_Zoll.zip into the
'SolidWorks Addin 2009' directory.
Copyright © 2009 Autodesk, Inc.